| Using the Features |
|
|
Button | Description |
|
|
qd POWER | Turn on and off the projection TV and other audio/video |
buttons | equipment you have programmed into the remote control. |
(GREEN) | For instructions, see “Programming the Remote Control” |
| on page 68. |
|
|
qf FUNCTION | Select the equipment (TV, SAT/CABLE) that you want to |
buttons | operate. The indicator lights up momentarily when pushed |
| to show which device the remote control is operating. |
|
|
qg TV/VIDEO | Cycles through the video equipment connected to your |
| projection TV’s video inputs: TV, VIDEO 1, VIDEO 2, |
| VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7. |
|
|
qh 0 – 9 and | Press 0 - 9 to select a channel, the channel changes after 2 |
ENTER | seconds. Press ENTER to select immediately. |
|
|
qj | Turns on/off Twin View. For details, see “Using Twin |
| View™” on page 41. |
GUIDE | Displays the program guide of your satellite. |
|
|
qk MENU | Press to display the projection TV |
| again to exit from the menu. |
|
|
ql CH +/– | Scan through channels. |
|
|
w; DRC/ | Press repeatedly to step through the available high- |
CINEMOTION | resolution picture modes: Interlaced, Progressive and |
| CineMotion. For details, see “Using the Video Menu” on |
| page 49. |
|
|
wa WIDE MODE | Press to step through the wide screen modes: Wide Zoom, |
| Normal, Full and Zoom. For details, see “Using Wide |
| Screen Mode” on page 47. |
|
|
Using the Features
zTo scan rapidly through the channels, press and hold down CH+ or