Connecting a Satellite Receiver

Installing and Connecting the Projection TV

Disconnect all power sources before making any connections.

1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.

2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks.

3 Connect a coaxial cable from your cable or antenna to the projection TV’s VHF/UHF jack.

✍If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

Installing and Connecting the

Rear of projection TV

VIDEO (yellow)

AUDIO-L (white)

AUDIO-R (red)

VIDEO

Coaxial cable

Satellite receiver

Satellite antenna cable

VMC-810S/820S (not supplied)

YC-15V/30V (not supplied)