Sony KP-57WV600 KP-57/65WV600 Front Panel, Infrared Receiver, Channel button

KP-57/65WV600

Front Panel

Setup	ACCESS
	1
	MEMORY
	STICK
	2

SETUP	POWER
		3
		4
	STAND BY	5
	TIMER	6
	CHANNEL 7

VOLUME 8

TV/VIDEO

9

FLASH

FOCUS

q;

ItemDescription

1MEMORY STICK When lit, indicates that the Memory Stick is being

ACCESS LED read. (Do not remove the Memory Stick when the

		indicator is lit.)
2	MEMORY STICK	Memory Stick insertion slot. For details, see “Inserting
		and Removing a Memory Stick” on page 66.
3	POWER	Press to turn on and off the TV.
4	Infrared Receiver	Receives IR signals from the TV’s remote control.
	(IR)

5STAND BY LED Blinks when the TV is turned on, then shuts off when the picture is displayed. If the LED blinks continuously, this may indicate the TV needs service (see “Contacting Sony” on page 90).

6 TIMER LED	When lit, indicates one of the timers is set. When the
	timer is set, this LED will remain lit even if the TV is
	turned off. For details, see page 84.

7-CHANNEL+Press to scan through channels. To scan quickly through channels, press and hold down either

CHANNEL button.

8	-VOLUME +	Press to adjust the volume.
9	TV/VIDEO	Press repeatedly to cycle through the video equipment
		connected to the TV’s video inputs.
0	FLASH FOCUS	Press to adjust the convergence (see page 44).

14