Using Your Remote

Code Identification

The Code Identification Feature allows you to identify the 4 digit library code stored under your device key. For example, if you want to find out what 4 digit code is stored under your TV device key, follow the six steps below:

1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button. 2. Press and release the desired mode button (TV, VCR,

etc.). The red indicator blinks, then stays lit.

3. Press and release the SETUP button. The red indicator blinks once and remains lit.

4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn. The number that causes the indicator light to blink is the first digit

in your code.

5.To find the second digit, repeat step 4, this time when the red indicator blinks off this is the second digit.

6.Repeat step 4 to find the third and fourth digits.