Direct Code Entry
1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired mode button (TV, VCR,
etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables (on separate sheet). Note: after
a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4.With your device on, press ON•OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your
equipment, try one of the other codes for your brand.
Write your codes down here for easy reference later.
Device | Device stored | Code |
|
|
|
TV | TV |
|
DVD |
|
|
VCR |
|
|
CBL/SAT |
|
|
AUDIO |
|
|
AUX |
|
|
|
|
|