Sony KL-40WA1K Replacing the Lamp, Turn off the power and disconnect the power cord

Page 29

Replacing the Lamp

When the lamp becomes dark or the picture colour is not normal, replace the lamp with a new one.

If you do not take the following precautions, you may get hurt or household belongings may be damaged.

Use the supplied new lamp for replacement. If you use another lamp, it may cause damage to the TV.

Do not remove the lamp except when replacing it. This may cause heat damage or fire.

Before replacing the lamp, turn off the power and disconnect the power cord.

Replace the lamp after it becomes cool. The front glass of the lamp remains 100 °C (212 °F) and more even 30 minutes after the power is turned off.

Do not place the removed lamp in proximity to children or flammable material.

Do not get the removed lamp wet, or insert objects inside the lamp. It may cause the lamp to explode.

Do not place near metal or easily flammable objects, as this may cause fire. Also, do not put your hand inside the lamp compartment, as you may be burned.

Attach the new lamp firmly. If it is not firmly attached, the picture may become dark or fire may result.

1 Turn off the power and disconnect the power cord.

Replace the lamp 30 minutes or more after the power is turned off.

Prepare the new lamp.

2 Remove the front panel.

Remove the front panel without moving the TV. Grasping the side of the front panel with your fingers, pull the panel forward. Be careful not to catch your fingernails.

3 Loosen the screw with the object such as a coin and remove the lamp cover.

4 Loosen the screw and pull out the lamp.

The lamp is still very hot just after the power is turned off. Be careful not to touch the front glass or surrounding area of the lamp or the glass of the lamp compartment.

GB

Loosen the screw with the supplied wrench.

Pull out the lamp by the handle.

5 Attach the new lamp. Fasten the screw tightly.

6 Attach the lamp cover. Fasten the screw tightly.

7 Attach the front panel.

Be careful not to damage the speaker.

When the indicator on the front panel flashes

The lamp is damaged, replace it with a new one.

Notes

Do not touch or stain the front glass of the new lamp or the glass of the lamp compartment. If the glass becomes dirty, the picture quality may deteriorate or the lamp life may be shortened.

Attach the lamp cover firmly. If it is not firmly attached, the power will not turn on.

When the lamp burns out, a noise is audible. This does not represent a damage.

Consult your nearest Sony service centre to obtain a new lamp.

29

Image 29
Contents LCD Projection TV Important Information Safety InformationContents Overview Symbol NameTV set-front Refer toVideo operation Remote commander Menu operationNo function on this set TV/Teletext operationInsert the batteries into the Remote Commander Check the supplied accessoriesPreparation Connect the aerialChoosing the Menu Language Country Tuning in to TV StationsPress Menu to restore the normal TV picture Presetting automatically starts from position Presetting Channels AutomaticallySYSTVBroadcastSystem PROGProgrammePositionPresetting Channels Manually Additional Presetting FunctionsTherearetwooptionstopresetchannelsmanually 7a DirectInputSorting Programme Positions Preset Using Further Programme6a V O L 6b AFTCaptioning a Station Name Skipping Programme PositionsTuning in a Channel Temporarily Using Parental LockAdjusting the Volume Switching the TV on and offOperating the TV Using the Buttons on the TV Watching the TVMore Convenient Functions Watching Teletext or Video InputAdjusting the Picture and Sound Adjusting and Setting the TV Using the MenuEffect of each control EffectSound Control Using the Sleep TimerAuto Operating Screen ModeChanging the screen position for Zoom/Auto Wide modes For normal ratio 43 aSelecting a teletext Direct Access FunctionsSwitching Teletext on and off Using Fastext Preventing a teletext page from being updatedAccessing next or preceding Revealing hidden information e.g. for a quizTOP/BOTTOM/FULL Using the Teletext MenuDisplaying User Pages User Page Bank SystemStoring pages Acceptable input signal Available output signal Connecting and Operating Optional EquipmentConnecting Optional Equipment Symbol 2 connector outputs Input signalSelecting Input and Output To go back to the normal TV pictureUsing AV Preset Tuning the Remote Commander to the equipment Remote Control of Other Sony EquipmentOptimum Viewing Area For Your InformationHorizontal viewing area Vertical viewing areaClean the dust with a vacuum cleaner Cleaning the Air FilterPull the filter upward and remove it Attach the filterWhen the indicator on the front panel flashes Turn off the power and disconnect the power cordReplacing the Lamp Lamp is damaged, replace it with a new oneSpecifications TroubleshootingProblem Solution Receivable Channels and Channel DisplaysStabilizing the Projection TV Cause Indicator flashing patterns