Sony KL-W9000 service manual OP Others, Aion AI Auto

OP (Others)

Item		Register Name	Range	Standard Values		Typical Standard Values
Display
0 OSDH		Display H Position	0-63	10 (VIDEO)	7(RGB)	2 Kinds (VIDEO, RGB)
1 OSDV		Display V Position	0-63	7 (VIDEO)	7(RGB)	2 Kinds (VIDEO, RGB)
2 ASHT		Auto Shut Off	0,1	Not used		0: OFF, 1: ON
3 CPWR		CH Power ON		Not used		Not used
4 AGCH		AGC Voltage High	0-15	Not used		Not used
5 AGCL		AGC Voltage Low	0-15	Not used		Not used
6 DBSS		DBS Category Yes/No		Not used		Not used
7 EDCK		EDTV FULL Mode Detection	0,1	Not used		Not used
8 AION		AI AUTO	0,1	Not used		Not used
9 K		Picture Adjusting Variable K	0-7	1		Don't set “0” (Actual value is
						1/8~7/8)
10	L	Picture Adjusting Variable L	0-7	0		0~7 is converted into 1~8 in actual use.
11	LENS	Display only	0	–		Lens focus adj.
12	PANEL	0:Green, 1:Red, 2:Blue, 3:White	0-3	–		Panel position adj.
13	WHITE	APL	0-1	–		White balance adj. (0: GAIN, 1: BIAS)
14	WIND	Display only	0	–		Window signal
15	STEP	Display only	0			00: Normal, 01: Pattern 1,
						02: Pattern 2
16 EDFL		EDTV FULL Detection ON	0,1	Not used		Not used
17	BC	g_bs_search [0]	1-15	Not used		Not used
18	TIME	Lamp Counting Timer				Current time count and 0 time are
						displayed alternately with UP/DOWN
–	FMTL	fh of distinction difference range	0			± ((3+FHTL) ×0.2) kHz
19
29	FVTL	fv of distinction difference range	0			± (1.0+FVTL) Hz
20
21HV1		Threshold of scanning line	0-15			(505+ (5×HV1)) lines
–		distinction (low)
22	HV2	Threshold of scanning line	0-15			(555+ (5×HV2)) lines
		distinction (high)
23	MINH	fh of the frequency correspond	0-31			20+ ((3+FHTL) ×0.2) kHz
		to MIN
24	MAXH	fh of the frequency correspond	0-31			42+ ((3+FHTL) ×0.2) kHz
		to MAX
25	MINV	fv of the frequency correspond	0-15			(42+MINV) Hz
		to MIN
26	MAXV	fv of the frequency correspond	0-15			(77+MAXV) Hz
		to MAX
27	FHAG	Equivalence frequency of fh	0-15			FHAG (20×FHAGms)
		changed detection
28	FVAG	Equivalence frequency of fv	0-15			FHAG (20×FVAGms)
		changed detection
29	NSAG	Equivalence frequency of	0-15			Not used
		non-signal detection (on signal)
30	FHMJ	fh difference range of before	0-7			± ((1+FHMJ) ×0.2) kHz
		the signal distinction
31	FVMJ	fv difference range of before	0-7			± ((3+FVMJ)
		the signal distinction

TP (Model Discrimination)

Item Display	Register Name	Range	Standard Values	Typical Standard Values
0 WIDE	HH	0,1	Not used
1 TIME	TIMER	0,1	0,1	Fan stop time switching
				0: 10 min (normal), 1: 10 sec
2 KL37	KL-W7000 model	0,1	0,1	0: KL-W9000 1: KL-W7000

KL-W7000/W9000

RM-Y980