Part Names and Functions - continued
POWER
To turn the unit ON and OFF:
1.Plug the power cord into an AC outlet.
2.Press the Power button (on the unit).
T e hmonitor's ON/STANDBY indicator turns red and the unit will be in STANDBY mode.
3.Press the POWER ON button on the remote control. The ON/STANDBY indicator will turn green when the unit is active.
4.Press the STANDBY button (on the remote) or the Power button (on the unit) to turn off the monitor.
Main Power Switch Cover
Included with the display is a cover for the Main Power Switch. Use this cover to prevent the unit from being inadvertently powered off.
Place the tab on the cable cover into the rectangular slot on the display.
Then using the screw provided, secure the cover to the display.
DISPLAY
To check display settings press the DISPLAY button on the remote. The screen changes each time the DISPLAY button is pressed. Display information will disappear after 3 seconds.
DIGITAL ZOOM
Digital zoom can change the picture position or enlarge the image on the screen.
1.Be sure ZOOM NAV function is off. Press the ZOOM button (+ or
Press the ZOOM + button to enlarge the image. Press the ZOOM - button to reduce the image.
Press the UP and DOWN or PLUS and MINUS buttons to reposition the picture.
2.Press the POINTER button to hide the pointer.
POINTER
Use the Pointer to point to a specific area on the screen.
Press the UP and DOWN or PLUS and MINUS buttons to reposition the Pointer.
English-12
ON 
OFF
SLOT
TAB
Main Power
Switch
Cover
Downloaded From