Operation - continued
Picture Settings Menu
Storing picture settings
This function stores the current input signal and PICTURE menu settings in memory in order to recall these settings if necessary. Up to six different settings can be stored.
Notes of up to 15 characters long can also be stored along with each setting.
Example: Storing picture settings at MEMORY1
On the “PICTURE MEMORY” function under the “PICTURE” menu, select “MEMORY1” and press the SET button. The “PICTURE MEMORY” screen appears.
PICTURE MEMORY
OFF: Picture memory not used.
MEMORY1 TO 6: Choose the desired memory slot to set. There are 6 to choose from, independent of inputs.
SETTING THE MEMORY
Use the p and q buttons to select the desired memory slot, from MEMORY1 to MEMORY6.
Use the t and u buttons to select “SET”, then press the SET button.
If necessary, input a note.
RESETTING THE MEMORY
Use the p and q buttons to select the desired memory slot, from MEMORY1 to MEMORY6, then use the t and u buttons to select “RESET”, and press the SET button.
The memory is cleared, and
INPUTTING NOTES
Use the t and u buttons to select “NOTE”, then press the SET button.
Use the p and q button to select the character.
Use the t and u buttons to move the cursor.
Use the SET button to delete the character at the cursor position.
When you have finished inputting the note, press the EXIT button.
English-22
Downloaded From