Setup the network connection
Set up the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 67)
•To set up the wireless connection, the Wireless LAN Adaptor is required.
•Please note that this TV does not support wireless public access points.
•Ensure the network connections and network environment are completed before starting setup.
1Connect the LAN cable or Wireless LAN Adaptor
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment.
Rear of the TV
Wireless connection | Internet | |
Wireless LAN Adaptor | environment | |
Access point | ||
(supplied: | ||
■ Setup Wireless | ||
LAN Adaptor | ||
•Connect to the | ||
Insert straight in | ||
USB 1, 2 or 3 port. | ||
or |
| |
Wired connection | Internet | |
| ||
LAN cable | environment | |
|
•If you do not have any broadband network services, please consult your retailer for assistance.
•For more information of the network connections (p. 59)
Caution
•To use the Wireless LAN Adaptor, an Access Point needs to be obtained.
•It is recommended to use the Wireless LAN Adaptor with the extension cable.
•To avoid radio wave interference, keep the TV away from the devices such as other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the Wireless LAN Adaptor.
Otherwise malfunction may occur.
2 | Select [Wired] or [Wireless] |
|
| Network Setup | select |
| Select Wired or Wireless | |
| access | |
| Wired Wireless Set later |
Auto Tuning
3Start the settings ■ [Wired]
Select [Auto]
Acquire IP Address
AutoManual
select access
•To set manually, select [Manual] and set each item. For details (p. 61 - 62)
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Automatically setup is done and the test of the network connection starts.
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections, and then select [Retry]
15