Grundig 32 VLE 8131 WF manual Connecting external data media, Settings for USB recording

USB RECORDING---------------------------------------------------------------------------------------------------------------

Connecting external data media

Notes:

7Before connecting the data medium, switch the television to standby with »8«. Connect the device and then switch the television on again.

7Before removing the external data medium, the television must be switched to standby, so that no data loss occurs.

7Your television features two USB sockets, »USB1« and »USB2«.

»USB1« is used to connect data media,­ which require an additional power supply

– for example, external hard disks.

Notes:

7The »USB2« socket of the television sup- plies a maximum power of 500 mA in ac- cordance with USB specifications. External hard disks which require more power may therefore only be connected to the »USB1« of the television.

7If you use a network cable for external hard disks which have been connected to the »USB1« socket of the television, this network cable must also be disconnected from the power supply when the television is switched off.

7External data media may not be disconnect- ed from the television while files on the data medium are being accessed.

Settings for USB recording

Selecting the menu

1Open the menu with »i«.

2Select the line »USB RECORDING« with »V« or »Λ« and press »●« to confirm.

– The »USB RECORDING« menu appears.

1Connect the »USB1« socket of the television­

and the corresponding socket of the data medium (external hard disk) using a USB ca- ble;

or

insert the USB plug of the USB memory stick into the »USB2« socket of the television.

2 Confirm the display » « with » « (green).

– The file browser appears.

	20.09.2010
USB RECORDING	15:46
PRnP	OK
Auto Preview	On

Manage data medium

Safely Remove Disk

Disk	USB
Partition	C:
Capacity Used	%3
Used (MB)	1249
Total (MB)	38145
Remaining SD recording time	1,008 min
Remaining HD recording time	288 min
Exit
Back

ENGLISH ­25