Grundig 32 VLE 8131 WF Additional Information for units sold in the UK, Blue Neutral Brown Live

Page 59

INFORMATION----------------------------------------------------------------------------------------------------------------------

Additional Information for units sold in the UK.

Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply.

The range of multi-system receivers is built to work in most European countries. However, the mains plug and socket system for the UK differs from many European countries.

This appliance has been supplied with a fitted, non-removable, approved converter plug for use in the UK. This converter plug is fitted with a 5A rated fuse.

In case this appliance is supplied with a moulded 2-pin Euro plug only, which is unsuitable for UK operation, this must be cut off and immediately disposed of. An approved 13A, 3-pin UK plug should then be fitted by a qualified electrician.

Note:

7The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket elsewhere.

If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any other type of plug is used it must be pro- tected by a 5A fuse either in the plug, or at the distribution board. If this type of plug becomes defective, ensure that the fuse is removed before disposal, to eliminate potential shock hazard.

If it is necessary to change the fuse in the non- rewireable plug, the correct type and rating (5A ASTA or BSI approved BS1362) must be used and the fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and plug must not be used until a replacement is obtained. Re- placement fuse covers should be obtained from your dealer.

Important:

7The wires in the mains lead are colour coded in accordance with the following code:

BLUE – NEUTRAL

BROWN – LIVE

As the colours of the wires in the mains lead of your appliance may not correspond with the col- oured marking identifying terminals in your plug, proceed as follows:

Connect the BLUE coloured wire to plug terminal marked with the letter “N” or coloured black.

Connect the BROWN coloured wire to the plug terminal marked with the letter “L” or coloured red.

In no circumstance must any of the wires be con- nected to the terminal marked with the letter “E”, earth symbol “V”, coloured green, or green & yellow.

ENGLISH ­59

Image 59
Contents LCD TV Overview Setup and Safety General informationSettings Connection and preparationOperation with a Common Interface Headphones Hi-fi system/AV receiverSpecial settings Displaying signal information­4 English English ­5 General information Special features of your ­television setImportant notes on environmental protection Receiving digital channelsConnection and preparation Connecting the antenna and power cordPlug the power cord into a wall socket Environmental note Inserting batteries intoRemote­ Control Pb Pr Y/AV2 Connections on the television setOptic Out AudioControls on the television set Moving the cursor Remote control Main functionsThen make the selection Remote control ­ All functionsEnlarges the picture Selects different subtitles Ends playback of a programme from an external data mediumHelp Initial set-up and tuning ­television channelsSelecting language, country and operating mode Various settingsStart the scan with » « green Tuning terrestrial television channels DVB-TTuning television channels from the cable provider DVB-C Select the line »Active Antenna Power« with »V« or »Λ«Selecting channel lists Changing the program table for the digital channelsSkipping channels Creating lists of favouritesSorting channels in the favourite list Deleting channelsAs from DVB-T receivers or DVD players­ Picture settingsSetting­ on the right side Sound settings Equalizer Exiting the settingSoundeffects SRS TruSurround HDBasic functions Electronic TV guide Eco modeZoom function Zapping functionChanging the picture format Grundig has no influence on ­ these restrictions Possible limitations when using an external data mediumInformation on recording and playing television programmes Selecting the menu Connecting external data mediaSettings for USB recording Selecting external data media Switching on automatic previewTesting the external data medium Safely remove diskOne-touch programme recording ″Pausing time shift ­ programmesRecording programmes Open the »CHANNEL LIST« with »« Presetting programmes to be recordedUsing the electronic TV guide Recording a programme from the channel listBy manual data entry Editing recording data in the ­ timer menuDeleting recording data in the timer menu Deleting programmes in the recording list PlaybackImage data File formatsVideo data Audio dataConfirm Display » « with » Green File browser appears Connecting external ­ data media»USB2« socket of the television set Devices­ in EN 55022/EN 55024 is not possibleFile browser Settings in the USB ­ setup menuSelecting the display mode Setting the display duration for pictures in a slideshowDivX VOD Basic playback functionsPlaying selected titles Additional playback ­ functionsSelecting chapters on DivX files Selecting titles on DivX filesRepeat functions Selecting a track or picture in steps SkipSelecting a certain passage for­ playback­ Fast forwardAdditional functions TOP text or Flof text modeLanguage settings Opening the Settings menuTimer settings Setting the date and timeParental control settings Locking television channels Restoring the television to the default settingsUpdating software Convenience functions Changing the PIN codeDigi Link functions on your television Device operation Switching the device to standbyHigh definition ­HD ready Connection options Connecting external devices Changing the headphone volume HeadphonesWith an analogue TV signal Connecting the headphonesHi-fi system/AV receiver Connecting the hi-fi system/­ AV receiverSetting the audio format Playing the audio signal via the ­ HiFi systemOptions »Auto Ajust« for automatic PC configura- tion Connecting a PCSelecting presets for the PC Settings for PC modeCommon Interface CI is an interface for DVB receivers What is a Common Interface?Access control for CI module and smart card Inserting the CA module­50 English English ­51 Searching for digital terrestrial TV channels automaticallyScan is complete as soon as »PROGRAM­ TABLE« appears Automatic service updateSearching for digital terrestrial TV channels manually Setting all analogue television channels Tuning analogue television channels­Selecting a channel list To select the preferred setting­Changing stored analogue channels­ Skipping television channels Exiting the settingsEntering channel names 8 digit maximum For digital channels only Open the menu with »i« Displaying signal informationChanging the pre-programming ­ of the remote control Environmental note Grundig 32 VLE 8131 WF Technical dataService information for retailers Problem Possible cause Remedy TroubleshootingBlue Neutral Brown Live Additional Information for units sold in the UK