Installing the Antenna | Cisco Systems AIRANT2544V4MR specification

Installing the Antenna

You can install the antenna on any flat vertical surface, on a pole, or on a ceiling. All hardware for mounting the antenna on a wall or ceiling is provided. If you intend to install your antenna on another surface, you must provide the appropriate hardware.

Tools and Equipment Required

A mounting installation kit is included with the antenna and consists of the following hardware:

•Mount interface bracket

•Mount base

•Wall bracket

•One 1/4–20 x ½-in. cap screw

•One 1/4–20 wing screw

•Two #10 x ¾-in. screws

•Two #10 x ½-in. screws

•One screen mesh washer

•One spherical washer

•3/16 allen wrench

•Rubber gasket

•Jam nut

You may need the following tools and equipment, which are not provided.

•A #2 Phillips screwdriver

•A drill and drill bit

•A pencil

•Two hose clamps

Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R)

	78-20770-01	7