LG Electronics 32/37/42/47LH7000-ZA specifications Swivel Stand

Page 10

PREPARATION

 

 

CAREFUL INSTALLATION ADVICE

ENGLISH

A

You should purchase necessary components to fix the TV

 

 

safety and secure to the wall on the market.

A Position the TV close to the wall to avoid the possibility of it falling when pushed.

A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

SWIVEL STAND

(Except for 19/22LH20**, 19/22LU40**, 19/22/26LU50**)

Image shown may differ from your TV.

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

1

2

1

2

TO USE THE STAND REAR

COVER (Only 37/42/47LH70**)

1Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tight- en them securely in the upper holes.

2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

Image shown may differ from your TV. Install the STAND REAR COVER as shown.

3

3Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

STAND REAR COVER

Grip the knob in your fingers and pull it.

!NOTE

GWhen moving the TV undo the cords first.

GUse a platform or cabinet strong and large enough to support the size and weight of the TV.

GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

8

Downloaded From TV-Manual.com Manuals

Image 10
Contents User’s’s Guidei Specificationifi ti Paginationi ti sheett LCD TV Safety Instructions Preparation Stand Base of the TV Stand InstallationAssemble the parts of the Stand Body with Stand BodyOnly 19/22LH20 Detaching Stand Image shown may differ from your TVLoose the bolts from TV Detach the Cover Base from T V. Desk Detach the Stand Body from TSwivel Stand If your TV has bolts in the eyebolts, loosen then boltsConnect the cables as neces Sary Back Cover for Wire ArrangementFit the Cable Management Clip as shown LCD TV Models 32/37/42/47LH70 Align the hole with the tab on the CableNot Using the DESK-TYPE Stand Fix the 4 bolts securely using the holes Back of the TVCeiling or slanted wall TV due to incorrect installationFloor 19/22LU40 100 19/22LU50Watching TV /PROGRAMME Control Turning on the TVTo View the Users Guide on the CD-ROM MaintenanceWeight To View the Simple Manual19LU50 When the user TroubleshootingRemote control Does not work Power is suddenly Turned off It means that the TV is currently set to Store Demo mode