APPENDIX
ENGLISH
TROUBLESHOOTING
The TV does not operate properly.
The remote control
does not work
Power is suddenly
turned off
ACheck to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV.
AEnsure that the batteries are installed with correct polarity (+ to +, - to
AEnsure that the correct remote operating mode is set : TV, STB etc.
AInstall new batteries.
AIs the sleep timer set?
ACheck the power control settings. Has the Power supply been interrupted.
AIf the TV is switched on and there is no input signal, it will switch off automatical- ly after 15 minutes.
The video function does not work.
No picture & No sound
Picture appears slowly
after switching on
No or poor colour
or poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
in pictures
No picture
when connecting HDMI
ACheck whether the TV is switched on.
ATry another channel. The problem may be with the broadcast.
AIs the power cord inserted correctly into the mains?
ACheck your antenna direction and/or location.
ATest the mains outlet by plugging another TV into the same outlet.
AThis is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
AAdjust Colour in menu option.
AAllow a sufficient distance between the TV and the VCR.
ATry another channel. The problem may be with the broadcast.
AAre the video cables installed properly?
AActivate any function to restore the brightness of the picture.
ACheck for local interference such as an electrical appliance or power tool.
AStation or cable channel experiencing problems, tune to another station.
AStation signal is weak, reposition the antenna to receive weaker stations.
ACheck for sources of possible interference.
ACheck antenna (Change the position of the antenna).
ACheck that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
There is a problem with PICTURE settings.
When the user | changes | A It means that the TV is currently set to Store Demo mode. | |
the picture settings, the | To switch to Home use mode you should do the followings: | ||
TV automatically converts | |||
From the TV Menu, choose OPTION | |||
back to the initial settings | |||
Home use. Now, you have completed switching to the Home use mode. | |||
after a certain period of | |||
| |||
time. |
| ||
16
Downloaded From