Panasonic PT-50LC13 How to connect the RGB in Terminals, Connecting a PC to RGB

Installation

How to connect the RGB IN Terminals

Connecting a PC to RGB IN

COMPUTER

RGB OUT AUDIO OUT

Connect a cable which matches the audio output terminal on the computer.

PC audio cable

(M3 stereo mini pin)

Conversion adapter (If necessary)

RGB cable (D-SUB 15P)

RGB IN Terminal (D-SUB 15P) Pin Layouts

5		4	3	2	1
10	9		8	7	6
15		14	13	12	11

Connection port view

Notes:

Pin No.	Signal name
1	R
2	G
3	B
4	NC
5	NC
6	Ground for R
7	Ground for G
8	Ground for B

NC: Not connected

Pin No.	Signal name
9	NC
10	Ground
11	NC
12	NC
13	HD/CSYNC
14	VD
15	NC

•Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) to connect a Macintosh computer to the set. There is no need to use an adapter for computers with PC / AT compatible D-SUB 15P terminal.

•The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied with this set.

•The picture will become dark if an PC signal with a vertical scanning frequency of 62 Hz is input. To obtain the optimum picture quality with the projection display, a vertical scanning frequency of 60 Hz is recommended.

•Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.

•Select the desired RGB input position by pressing the PC/MENU or TV/VIDEO button. (P. 35)

•Similar connections are available at the RGB IN 1, 2 Terminals.

18 For assistance, please call : 1-888-VIEW PTV(843-9788)