Marantz UD7006 manual General Setting, System

General Setting

Settings for system, language, parental lock, network, etc. can be made.

System Default settings are underlined.

Set the following settings.

•Screen saver settings

•Power saving mode settings

•HDMI control function settings

•Initialize settings

•Firmware update from the Internet

•BD-LIVE Memory switching settings

Setting items	Setting details
Screen Saver	On : The screensaver function activates when stop or pause status
Sets the screensaver.	continues for about three minutes. The screensaver function also activates
	during playback of a CD, Super Audio CD or audio file when no operations
	are performed for about three minutes.
	Off : Does not use the screensaver.
Auto Power Mode	On : This setting automatically sets the power to standby if any of the
This setting automatically	following states continues for approximately 30 minutes.
sets the power to standby.	• Disc not loaded
	• Playback stopped
	• Stopped due to the resume function

ENGLISH

Setting items	Setting details
Initialize	Cancel : Does not initialize.
All settings including audio	OK : Executes initialization.
mode and picture quality are
set to default settings.
Firmware Update	Check for Update : Checks if a newer version of firmware exists. You
Updates the firmware of the	can also check approximately how long it will take to complete an update.
unit via the Internet.	If the firmware is already updated to the latest version, the firmware
	updating operation starts after you press ENTER.
	When updating starts, the power indicator lights red and the GUI menu
	screen shuts down.
	While updating, a rough estimate of remaining time is indicated on the
	display.
	When updating is complete the power indicator lights green and the
	normal status is resumed.
Update Notification	On : The message for updating is displayed on a television screen.
Displays the message for	Off : The message for updating is not displayed on a television screen.
updating on a television
screen just after the power
is turned on.

Simple version

Basic version

	Off : Does not use the auto power mode.
Power Saving	Power Saving Standby : This is the lowest power consumption mode.
Sets to power saving mode	During standby, operations are not accepted via HDMI control and RS-232C.
during standby.	Power indicator status in standby mode : Off
	Normal Standby : During standby, operations are accepted via HDMI
	control and RS-232C. Power consumption is slightly higher at this time.
	Power indicator status in standby mode : Red

BD Data Utility

Initializes the BD data stored in the built-in memory or external memory used for BD-Live.

BD Data Information : The BD data used for BD-Live are initialized. The space remaining in the memory being used is displayed.

FMT BD Data : Initializes the space for BD data being used for BD-Live.

This operation deletes all data. When a USB memory device that stores the data is inserted, never execute this operation.

BD-Live Memory : Built-in memory or external memory is selected for the BD-Live memory.

Advanced version

HDMI Control

Links the unit and a device connected with an HDMI cable that supports HDMI control.

On : Links with the device connected to HDMI.

Off : Disables the HDMI control function.

•For the HDMI control function to operate, it is necessary for the unit or HDMI-compatible TV connected to the unit to have an HDMI connection.

•Refer to “HDMI control functions” (vpage 24) for more information on HDMI control functions.

•After the “HDMI Control” setting has been changed, always turn off the power to the connected equipment and then turn it back on.

•Internal : The built-in memory is used.

•External : The USB memory device inserted in the unit is used.

If the capacity of BD-Live is more than 1 GB, select the external memory in advance (vpage 18).

NOTE

When the following message is displayed after “Firmware Update” (vpage 37), follow the instructions in the message to perform operations.

“Disconnect the power plug of the unit from the outlet, wait approximately 30 seconds, and then

HDMI Power Off Control	On : Turns the unit’s power to standby through linkage to the TV.
Links the power of the unit	Off : Does not turn the unit’s power to standby through linkage to the TV.
and a device connected with
an HDMI cable that supports
HDMI control.

insert the plug again before use.”

Information

Remote control operation	Displaying the menu	Move the cursor	Decision the setting	Return to previous menu	37
buttons	Cancel the menu	(Up/Down/Left/Right)