OPERATION
USING THE T 557
ENGLISH
NETWORK SETUP MENU
The NETWORK settings are needed to use the BD Live feature. By connecting the T 557 to the internet, special
Ensure proper broadband connectivity when configuring the following NETWORK features.
CONNECTION SETTING
Press [ ] or [ENTER] to setup your network connection. Use the following procedure in setting up your connection.
1Upon selecting > or [ENTER], the CONNECTION SETTING as below is shown.
Use [ | ] to configure your connection with below OSD. |
2After selecting either “Static” or “Dynamic”, click “OK” to complete the network connection.
3After setting up the connection, a menu will prompt you test your network connection. Click “OK” to complete the network connection and exit the “CONNECTION SETTING” menu.
4If “Test” is selected, the network connection status is displayed as in below
5 Select “OK” to exit connection setting/status OSD.
Static: Select to set manually the IP address, Subnet Mask, Gateway and consequently the DNS Server settings.
Dynamic: Select to automatically allocate an IP address.
16