INTRODUCTION
GETTING STARTED
ENGLISH
UNPACKING AND SETUP
WHAT’S IN THE BOX
Packed with your T 557 you will find:
•An audio/video cable connector
•The BR 2 remote control with 2 (two) AA batteries
•A detachable AC power cord
•HDMI cable (European version model only)
•Set of rubber feet
•This owner’s manual
SAVE THE PACKAGING
Please save the box and all of the packaging in which your T 557 arrived. Should you move or otherwise need to transport your T 557, this is by far the safest container in which to do so. We’ve seen too many otherwise perfect components damaged in transit for lack of a proper shipping carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to both sides and behind), and that will provide a clear line of sight, within 23 feet/7 meters, between the T 557’s front panel and your primary listening/viewing position. This will ensure reliable infrared remote control communications.
The T 557 generates a modest amount of heat, but nothing that should trouble adjacent components. It is perfectly possible to stack the T 557 on top of other components.
DISC LOADING AND PLAYBACK
There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the T 557 to malfunction. “Check Disc” appears at the
The following are important tips when loading a disc
•Do not push the disc tray while it is moving. Doing so may cause the T 557 to malfunction.
•Do not push up the disc tray or put any objects other than discs on the disc tray. Doing so may cause the T 557 to malfunction.
• Keep your fingers well clear of the disc tray as it is closing. Be especially careful with children’s fingers around the closing disc tray, as there is a risk of personal injury.
Press [], the disc tray is automatically closed. Playback of the first track starts if a CD is loaded. For BD, DVD, USB or other disc media, playback operation is accessible through their menu screen.
NOTE
Do not move the T 557 during playback. Doing so may damage the disc and the T 557.
Assembly of rubber foot with plastic foot
Step 1 | Insert rubber foot |
| |
| Squeeze to allow the |
| rubber foot to clamp under |
| the six flanges on the |
| plastic foot |
| Plastic foot flange |
Step 2 |
Rubber foot inserted |
QUICK START
In case you simply cannot wait to experience the performance of your new NAD T 557, we provide the following “Quick Start” instructions to get you underway.
Please make all the connections to your T 557 with the unit unplugged. It is also advisable to
PLAY A BLU-RAY DISC
1Using a compatible HDMI connector, connect the T 557’s HDMI OUT to the corresponding HDMI input of your
2Connect the supplied AC cord to the T 557 AC mains input and then plug into an AC outlet. Follow the same for your
3Press the [OPEN/CLOSE] button to switch ON the T 557 and at the same time open the disc tray.
4Load the
5 Press the front panel [PLAY/PAUSE] button or [ ] button of BR 2 remote control to close the disc tray and start playback. You should hear audio and see an image on the TV/monitor. If one or the other fails to appear, check your TV/monitor’s input settings or the T 557 audio/video connections.
Enjoy the movie but be sure to set aside time to read this manual thoroughly to set up and configure your T 557 according to your preference.
6