HBD-E370/E470/E570/E870/T57
Pin No. | Pin Name | I/O | Description |
F18 | VIND7 | - | Not used |
F20 | MCIN | I | Digital audio data input from the A/D converter |
F22 | AOSDATA3 | O | Digital audio data output to the |
F24 | AVSS12_DMPLL | - | Ground terminal |
F26 | TN_PLLG | - | Not used |
F28 | AVSS33_HDMI | - | Ground terminal |
F30 | AVDD12_HDMI | - | Power supply terminal (+1.2V) |
F32 | AVSS33_VDACBG | - | Ground terminal |
F34 | OPWRSB | O | Power on/off control signal output to the system controller |
F36 | ETMDC | O | Serial data transfer clock signal output to the ethernet interface |
F38 | ETRXDV | I | Receive data valid signal input from the ethernet interface |
F40 | HDMISCK | I/O | |
F42 | SFDO | O | Serial data output to the serial flash |
G1 | FE_VRDC0 | O | Voltage output terminal for automatic power control circuit |
G3 | FE_FG | I | Motor hole sensor signal input from the motor driver IC |
G5 | FE_GIO7 | O | Laser diode on/off control signal output to the BD drive |
G7 | FE_JTCLK | - | Not used |
G9 | FE_GIO6 | O | MODE C signal output to the BD drive |
G11 | VOUTVSYNC | - | Not used |
G13 | VOUTD18 | - | Not used |
G15 | VIND8 | O | Video format selection signal output to the video amplifier |
G17 | VIND10 | - | Not used |
G19 | VIND18 | I | PCM audio data input from the digital audio interface receiver |
G21 | SPDATA | I | Digital audio data input from the digital audio interface receiver |
G23 | AOSDATA1 | O | Digital audio data output to the power amp and |
G25 | AVSS33_XTAL | - | Ground terminal |
G27 | AVSS33_HDMI | - | Ground terminal |
G29 | AVDD12_HDMI | - | Power supply terminal (+1.2V) |
G31 | AVDD33_VDACY | - | Power supply terminal (+3.3V) |
G33 | LCDRD | O | Serial data output to the system controller |
G35 | VCC3IO_STB | - | Power supply terminal (+3.3V) |
G37 | DVSS | - | Ground terminal |
G39 | HTPLG | I | Hot plug detection signal input from the HDMI ARC OUT connector |
G41 | SFCK | O | Serial data transfer clock signal output to the serial flash |
G43 | NFWEN | O | Write enable signal output to the NAND flash |
H2 | FE_JTDO | - | Not used |
H4 | NS_RFIN | I | SACD audio data (negative) input terminal |
H6 | FE_JTRST# | - | Not used |
H8 | FE_GIO10 | - | Not used |
H10 | VCC3IO_3 | - | Power supply terminal (+3.3V) |
H12 | VCC3IO_3 | - | Power supply terminal (+3.3V) |
H14 | VIND6 | O | Video muting on/off control signal output to the video amplifier |
H16 | DVSS | - | Ground terminal |
H18 | VCC3IO_3 | - | Power supply terminal (+3.3V) |
H20 | AMUTE | O | Muting on/off control signal output terminal Not used |
H22 | AOSDATA2 | O | Digital audio data output to the power amp |
H24 | AVSS12_APLL | - | Ground terminal |
H26 | AVDD33_HDMI | - | Power supply terminal (+3.3V) |
H28 | AVSS12_HDMI | - | Ground terminal |
H30 | AVSS33_VDACY | - | Ground terminal |
H32 | AVSS33_VDACR | - | Ground terminal |
H34 | ETCRS | I | Carrier sense signal input from the ethernet interface |
H36 | DVSS | - | Ground terminal |
H38 | AVDD10_LDO | - | Power supply terminal (+1.0V) |
H40 | SFDI | I | Serial data input from the serial flash |
H42 | NFD0 | I/O | |
J1 | FE_HAVC | O | Reference voltage output to the BD drive |
J3 | FE_MPXOUT3 | - | Not used |
J5 | FE_GIO5 | O | MODE B signal output to the BD drive |
J7 | FE_GIO4 | O | MODE A signal output to the BD drive |
78