Sony HBD-E370/E470/ E570/E870/T57 VIND9, VCC3IOPWM, Sfcs, NFD1, NFD2, FEMPXOUT2, Feeqbias, Nsrfip

HBD-E370/E470/E570/E870/T57

Pin No.	Pin Name	I/O	Description
J9	DVSS	-	Ground terminal
J11	DVSS	-	Ground terminal
J13	DVSS	-	Ground terminal
J15	VCC3IO_3	-	Power supply terminal (+3.3V)
J17	VIND9	-	Not used
J19	DVSS	-	Ground terminal
J21	VCC3IO_PWM	-	Power supply terminal (+3.3V)
J23	DVSS	-	Ground terminal
J25	AVSS12_27MPLL	-	Ground terminal
J27	AVDD33_HDMI	-	Power supply terminal (+3.3V)
J29	AVSS12_HDMI	-	Ground terminal
J33	VCC3IO_STB	-	Power supply terminal (+3.3V)
J37	AVDD33_LDO	-	Power supply terminal (+3.3V)
J39	SFCS	O	Chip select signal output to the serial flash
J41	NFD1	I/O	Two-way data bus with the NAND flash
J43	NFD2	I/O	Two-way data bus with the NAND flash
K2	FE_MPXOUT2	O	Digital audio data output terminal for the SACD
K4	FE_EQBIAS	-	Not used
K6	FE_SFCS#	O	Chip select signal output terminal for the front-end serial flash
K8	NS_RFIP	I	SACD audio data (positive) input terminal
K34	DVSS	-	Ground terminal
K36	AVSS33_LDO	-	Ground terminal
K38	NFCLE	O	Command latch enable signal output to the NAND flash
K40	NFD3	I/O	Two-way data bus with the NAND flash
K42	NFD4	I/O	Two-way data bus with the NAND flash
L1	FE_VWDC3O	-	Not used
L3	FE_VDAC0	-	Not used
L5	FE_MPXOUT1	O	Digital audio data output terminal for the SACD
L7	FE_SFWP#	-	Not used
L9	FE_GIO8	-	Not used
L35	VCC3IO_2	-	Power supply terminal (+3.3V)
L37	NFALE	O	Address latch enable signal output to the NAND flash
L39	NFCEN2	O	Chip enable signal output terminal Not used
L41	NFD5	I/O	Two-way data bus with the NAND flash
L43	NFD6	I/O	Two-way data bus with the NAND flash
M2	FE_VWDC2O	-	Not used
M4	FE_AUX1	I	Monitoring signal input from the BD drive
M6	FE_RSTI	I	Reset signal input terminal for the front-end power
M8	FE_MVDDO	-	Power supply terminal (+3.3V)
M10	FE_MVDDO	-	Power supply terminal (+3.3V)
M36	NFREN	O	Read enable signal output to the NAND flash
M38	NFCEN	O	Chip enable signal output to the NAND flash
M40	NFD7	I/O	Two-way data bus with the NAND flash
M42	B_REXTDN	-	Not used
N1	FE_INB	O	Main beam (B) input from the BD drive
N3	FE_TRINC	-	Not used
N5	FE_VFVREF	-	Not used
N7	FE_DVDD33O	-	Power supply terminal (+3.3V)
N9	FE_DVDD33O	-	Power supply terminal (+3.3V)
N11	FE_DVDD33O	-	Power supply terminal (+3.3V)
N35	VCC3IO_2	-	Power supply terminal (+3.3V)
N37	DVSS	-	Ground terminal
N39	DVSS	-	Ground terminal
N41	B_RCLK1	O	Clock signal (positive) output to the SD-RAM
N43	B_RCLK1B	O	Clock signal (negative) output to the SD-RAM
P2	FE_INA	O	Main beam (A) input from the BD drive
P4	FE_TRINA	-	Not used
P6	FE_VWDC1O	-	Not used
P8	FE_AVDD12_1	-	Power supply terminal (+1.2V)
P10	FE_DVDD33O	-	Power supply terminal (+3.3V)

79