FUNCTION SETUP
Speaker setting (Available when you have HDMI cable connected to HDMI OUT jack)
This unit allows you to enjoy
How to navigate through “HDMI Multi(LPCM)”:
INTRODUCTION
1)Use [K / L] to select your desired menu item then press [ENTER].
2)Use [K / L] to select your setting items.
•Press [RETURN ] to go back to the previous screen.
3)Use [s / B] to select desired options. (Except for “Test Tone”, “Default” and setting options in “Speaker Size” setting.)
For setting options in “Speaker Size” setting: Press [ENTER] to select desired options.
For “Test Tone”:
Use [s / B] to select “Off”, “Manual” or “Auto”, then press [ENTER].
•The test tone will be output. If you select “Manual”, use [K / L] to select desired speaker, then use [s / B] to adjust the volume. If you select “Auto”, use [s / B] to adjust the volume of the speaker that outputs the test tone.
•If you want to stop the test tone, press [RETURN ].
For “Default”:
Press [ENTER] to reset to the default.
4) Press [SETUP] to exit.
Front speaker (left) | Front speaker (right) |
| Center speaker |
| Subwoofer |
Surround | Surround |
speaker (left) | speaker (right) |
Surround | Surround |
back speaker | back speaker |
(left) | (right) |
e.g.) basic layout with
CONNECTIONSPLAYBACK FUNCTION SETUP
<Speaker setting for the audio signal output from HDMI OUT jack>
Quick AHDMI Audio Out AHDMI Multi(LPCM)
Custom AAudio AHDMI Audio Out AHDMI Multi(LPCM)
Menu | Setting items | Options | Descriptions | |
Speaker Size | Front | Large* | Large: | |
Selects the desired |
|
| For the large speakers with strong low | |
| Small | |||
speaker to set. Then |
|
| frequency reproduction capabilities. | |
Center | Large* | |||
change the setting by | Small: | |||
| Small | |||
referring to the |
| For the small speakers which do not provide | ||
descriptions. | Subwoofer | On | strong bass sound. | |
| Surround | Large* | You cannot change the setting of | |
|
|
| “Subwoofer”. | |
|
| Small | ||
|
|
| Speakers which are not supported by the | |
| Surround Back | Large* | ||
| connected device will be displayed in gray. | |||
|
| Small | ||
|
|
| ||
| Default |
| Select “Default”, then press [ENTER] to reset | |
|
|
| “Speaker Size” setting to the default. | |
|
|
|
|
OTHERS
EN | 39 |