Sears NB530SLX owner manual Maintenance, General, Terminals

Page 49

 

 

OTHERS

 

 

 

 

 

 

 

 

 

 

 

General

 

Signal system

NTSC color

 

 

Power requirements

120 V AC, 60 Hz

 

 

Power consumption

22 W (standby: 0.5 W)

 

Dimensions (width x height x depth)

17.2 × 2.4 × 12.0 inches (435 x 59 x 303 mm)

 

Weight

6.7 lbs. (3.0 kg)

 

 

Operating temperature

41°F (5°C) to 104°F (40°C)

 

Operating humidity

Less than 80 % (no condensation)

 

 

 

 

 

 

 

Terminals

 

 

Video output

1 Vp-p (75Ω)

 

 

 

RCA jack x 1

 

 

 

 

 

 

 

 

Component video output

Y: 1 Vp-p (75Ω)

PB/CB: 700 mVp-p (75Ω)

PR/CR: 700 mVp-p (75Ω)

 

RCA jack x 3

 

 

 

 

 

Rear

HDMI output

 

 

 

HDMI jack x 1

Video: 480p, 720p, 1080i, 1080p, 1080p24 / Audio

 

 

Audio output (Analog)

L/R: 2 Vrms (output impedance: more than 1kΩ)

 

 

RCA jack x 2

 

 

 

 

 

 

 

Audio output (Digital)

500 mVp-p (75Ω)

 

 

 

RCA jack x 1

 

 

 

Optical jack x 1

Digital connector

 

 

Note

• The specifications and design of this product are subject to change without notice.

Maintenance

INTRODUCTION CONNECTIONSPLAYBACKFUNCTION SETUP

Servicing

•Please refer to relevant topics on “Troubleshooting” on page 44 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

•Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit. Do not attempt to playback such discs, as they may damage the unit.

OTHERS

Cleaning the cabinet

•Wipe the front panel and other exterior surfaces of the unit with a soft, slightly damp cloth.

•Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

IR signal check

•If the remote control is not working properly, you can use an AM radio or digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.

• With an AM radio: Tune the AM radio to a nonbroadcasting frequency. Point the remote control towards it, push any button and listen. If the sound from the radio flutters, it is receiving the remote control’s infrared signal.

•With a digital camera (including built-in cell phone

cameras):

Point a digital camera towards the

• If this unit still does not perform properly although you

remote control. Push any button on the

refer to the relevant sections and to “Troubleshooting” in

remote control and look through the

this manual, the laser optical pickup unit may be dirty.

digital camera. If the infrared light

Consult your dealer or an authorized service center for

appears through the camera, the remote

inspection and cleaning of the laser optical pickup unit.

control is working.

 

EN

47

Page 48 Page 50
Image 49
Page 48 Page 50
Contents NB530SLX Play Better Supports up to 1080i resolution Best Supports up to 1080i / 1080p, 1080p24 resolutionHdmi Cable Component Video Cable and Audio CableIntroduction Safety InstructionsTo Avoid the Hazards of Electrical Shock and Fire Avoid a place with drastic temperature changesLocation and Handling Dew Condensation WarningContents Remote control with Supplied AccessoriesTrademark Information Batteries WPZ0102TM018 AAx2 NB804UD WPZ0102LTE01Symbols Used in this Manual FeaturesSymbolDescription Easy and simple connection to your Hdtv viaRear Panel Front Panel114 Remote ControlUsing a Remote Control Installing the Batteries in the Remote ControlOpen the cover Insert batteries Close the coverExample of Display Message Front Panel DisplayConnection to the TV GoodSupports only 480i resolutionStandard Video + Standard Audio Connection Component Video + Standard Audio ConnectionChannel Analog Audio Connection Digital Audio Connection Connection to an Audio SystemHdmi Audio Connection Supplied cables used in this connections are as followsFinding the Video Channel on Your TV Playable Discs and Files Information on PlaybackUnplayable Discs and Files Color Systems Structure of Disc / SD Memory Card ContentsOn-Screen Display Region CodesBit rate information Title informationTrack / File information Disc informationReading the SD Memory Card How to Insert a DiscPress OPEN/CLOSE a to open the disc tray Press OPEN/CLOSE a to close the disc traySelected media mode is now activated Selecting the Media ModeInsert a disc refer to page 18 on how to insert a disc Press PowerPlaying Back BD / DVD Using the Title / Disc / Pop-up Menu Playing Back a VR mode DVD-RW/-RUse s / B to select Original or Playlist Use K / L to select a desired title, then press Enter Playing Back Audio CD / Jpeg FilesInsert an audio CD or a disc/card with Jpeg files Use K / L / s / B to select a Kodak Picture CDDesired track to be played back Then press Play B or EnterSlow Forward Playback Fast Forward / Fast ReverseStep by Step Playback Repeat PlaybackProgram Playback RepeatRandom Playback Adjusting the PictureRapid Playback Black levelVirtual Surround PIP Bonusview SettingCamera Angle Noise reduction DVD-onlyUsing the Number buttons Direct Search Title Search Using SearchSearch Chapter SearchUse K / L to select your desired subtitle or style Switching Subtitles Switching Audio SoundtrackPress Subtitle to exit Use K / L to select your desired audio stream channelMix Audio Output Setting the BD Audio ModeHD Audio Output Follow the procedure below depending on the setting items Using the Setup MenuQuick Use s or Return to go back to the previous screenCustom Custom menu contains all the setting itemsAudio Setting items OptionsSubtitle Disc MenuProgressive Mode Hdmi Video ResolutionTV Aspect Hdmi Deep ColorField Still Mode*1 AutoFrame Hdmi Audio Out BD Audio ModeDown Sampling Audio signals output from Hdmi OUT jack Hdmi Audio Out SettingWhen BD Audio Mode is set to Mix Mode is set to HD Audio OutputQuick Ahdmi Audio Out AAudio Mute ADigital Out Digital Out settingSpeaker Size setting to the default How to navigate through Hdmi MultiLPCMSpeaker Size Delay Time Menu Setting items Options DescriptionsChannel Level Proceed to a C ParentalAngle Icon Auto Power OffPanel Display Slide ShowSetup Press ENTER. For Setup and Format SD Card onlyInitialize Erase Saved BD-ROM Data PlayerProblem Solution TroubleshootingGlossary Language Code Language Code ListGeneral MaintenanceTerminals 1VMN26813 Customer Service Tel
Top Page Image Contents