Panasonic DMP-BDT330 Using the Digital Media Controller, Possible applications Renderer Server

Press [HOME]. Select “Network”. Select “Home Network”. Select “Media Renderer”.

Using the Digital Media

Controller

You can use a smartphone or tablet as the Digital Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).

Possible applications:

Renderer	Server	*
	Controller *
	Server	*

+

RendererController

* DMC compatible software should be installed.

Preparation

Perform steps 1 to 3. (> 24)

4Perform the “Remote Device Settings”. (> 32)

≥ You can register up to 16 devices.

1

2

3

4

5 Select “Home Network” or “Wi-Fi Direct” and press [OK], then follow the indications on the screen.

6 Operate the DMC compatible devices.

To exit from Media Renderer screen Press [HOME].

About DLNA and Media renderer

For more details, refer to the following website and the operating instructions for each of the equipment. http://panasonic.jp/support/global/cs/ (This site is in English only.)

≥Wi-Fi Direct connection while using Home Network feature is only temporary, and the network connection method returns to the original setting when exiting.

≥Depending on the device or connection environment, the data transfer rate may decrease.

≥Depending on the contents and the connected equipment, playback may not be possible.

≥Items displayed in gray on the display cannot be played back by this unit.

≥This unit can be played back via connected equipment only when controlled using DMC.

Playback

VQT4V26 25