BATTERY INSTALLATION
$$$ | $$$ |
REMOTE CONTROL
1.Remove the Battery Compartment cover by pushing in on the tab and then lifting the cover off.
2.Install two (2) “AAA” batteries, paying attention to the polarity diagram in the battery compartment.
3.Replace the Battery Compartment cover.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
2.Use only the size and type of batteries specified.
3.Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment. A reversed battery may cause damage to the device.
4.Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
5.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
6.Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s directions.)
7.Remove batteries promptly if consumed.
8.Clean the battery contacts and also those of the device prior to battery installation.
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
About 20 ft. |
NOTES:
•When there is an obstacle between the Player and the transmitter, the transmitter may not operate.
•When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the Player, the remote operation may be unstable.
8