Memorex MVBD2520-R user manual Programmed Playback

CD OPERATION (CONTINUED)

PROGRAMMED PLAYBACK

The player in this unit has a 15 track programmable memory that allows you to program up to 15 tracks on any disc for playback in any desired order. You may program 15 different tracks or you may also program certain tracks to play more than once. To perform Programmed Playback, proceed as follows:

1

2

2

4

1

3

3

During playback of a CD disc, press the PROGRAM/Red button; the Program menu will appear on the TV screen.

Press the ENTER button 1. Select the first track using the Number (0-9) buttons 2 or the Navigation (π,†) buttons 3. Press the ENTER button 1 to go to the next program.

NOTES:

•To clear and input a track again, select the track then press the CLEAR 4 button.

•To redo a program number, select it using the Navigation (π,†) buttons 3. Press the ENTER button 1 and reset.

3

Repeat step 2 until all desired tracks have been programmed (up to 15). Press the Play ® button to start the program playback. Playback will begin on the first track that you programmed and the player will continue to play all of the tracks that you programmed in the order in which you programmed them. After all programmed tracks have been played, the unit will stop automatically.

OSC SETUP:

During playback, press the OSC button; the OSC menu will appear. You can set the following in this menu:

Track: Select a desired file to play.

Time: Select and then repeatedly press the Navigation (†) button to cycle between the disc’s elapsed playing time, the disc’s remaining playing time, the track’s elapsed playing time, and the track’s remaining playing time.

Play Mode: Select between Random or Normal.

Bitrate: Select to view the disc’s audio bitrate.

Instant Search: Press to start fast forward search in order to locate a particular section. Press the Play button to resume the normal playback.

Instant Replay: Press to rewind the unit approximately 10 seconds.

Press the OSC button again to return.

42