6.Select a value to enter (IP Address, for example), and then press v button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the v button.
7.Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 6.
8.Repeat Steps 6 and 7 until you have filled in all values.
Notes
\\ You can get the Network values from your Internet provider.
9.When finished, select OK, and then press the v button. The Security Screen appears.
10.On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the v button.
11.When finished, select Done at the right of the screen, and then press the v button.
The player verifies the network connection and then connects to the network.
12.After the player verifies the network, select OK, and then press the v button.
ĞĞWPS(PBC)
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button.
5.Press the ▲ button on your remote, and then press the ► button to select the WPS(PBC).
6.Press the v button on your remote. The "Press the PBC button" message appears.
7.Press the WPS(PBC) button on your router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network.
The Network Status screen appears. The player connects to the network after the network connection is verified.
ĞĞWPS(PIN)
Before you begin, open the router's setup menu on your PC and access the screen with the WPS PIN entry field.
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button. The player searches for and then displays a list of the available networks.
5.Select the desired network, and then press the v button.
6.Select the WPS(PIN), and then press the ► button. The PIN
7.Enter the PIN into the WPS PIN entry field in the router's Set Up screen and then save the the screen.
NOTEs
\\ Contact the manufacturer of the router for instructions explaining how to access the route's Set Up screens or refer to the router's user's manual.
\\ For WPS connection, set your wireless router’s security encryption to AES. Setting to WEP security encryption does not support WPS connection.
04 Settings
English 31