Progressive Mode, Digital Output, Downmixing Mode

Progressive Mode

Lets you improve picture quality when viewing DVDs.

Audio Settings

Digital Output

Set the Digital Output to match the capabilities of the AV receiver you’ve connected to the player : For more details, please refer to the Digital Output Selection table below.

Digital Output Selection


			Bitstream	Bitstream	Bitstream
Setup		PCM		(Re-encoded	(Re-encoded
			(Unprocessed)
				DTS)	Dolby D)
	PCM	Up to PCM 7.1ch	PCM	DTS re-encoded	Re-encoded
					Dolby Digital *
	Dolby Digital	PCM 2ch	Dolby Digital	DTS re-encoded	Re-encoded
					Dolby Digital *
	Dolby Digital Plus	PCM 2ch	Dolby Digital Plus	DTS re-encoded	Re-encoded
Audio Stream					Dolby Digital *

	Dolby TrueHD	PCM 2ch	Dolby TrueHD	DTS re-encoded	Re-encoded
on Blu-ray
					Dolby Digital *
Disc
	DTS	PCM 2ch	DTS	DTS re-encoded	Re-encoded

					Dolby Digital *
	DTS-HD Hi	PCM 2ch	DTS-HD Hi Resolution Audio	DTS re-encoded	Re-encoded
	Resolution Audio				Dolby Digital *
	DTS-HD Master	PCM 2ch	DTS-HD Master Audio	DTS re-encoded	Re-encoded
	Audio				Dolby Digital *
Audio Stream	PCM	PCM 2ch	PCM 2ch	PCM 2ch	PCM 2ch
	Dolby Digital	PCM 2ch	Dolby Digital	Dolby Digital	Dolby Digital
on DVD
	DTS	PCM 2ch	DTS	DTS	DTS

				Decodes the main	Decodes the main
					feature audio and
			Outputs only the main feature	feature audio and
					BONUSVIEW audio
				BONUSVIEW audio
		Decodes the main feature	audio stream so that your		stream together
				stream together into
Definition for		audio and BONUSVIEW	AV receiver can decode the		into PCM audio and
				PCM audio and adds
	Any	audio stream together	audio bitstream.		adds Navigation
Blu-ray Disc				Navigation Sound
		into PCM audio and adds	You will not hear BONUSVIEW		Sound Effects, then
				Effects, then re-
		Navigation Sound Effects.	audio or Navigation Sound		re-encodes the PCM
				encodes the PCM
			Effects.		audio into Dolby
				audio into DTS
					Digital bitstream or
				bitstream.
					PCM.

*If the Source Stream is 2ch, “Re-encoded Dolby D” Setting is not applied. Output will be PCM 2ch.

Blu-ray Discs may include three audio streams :

-- Main Feature Audio : The audio soundtrack of the main feature.

-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.

-- Navigation Sound Effects : When you choose a menu navigation selection, a Navigation Sound Effect may sound.

Navigation Sound Effects are different on each Blu-ray Disc.

✎✎ NOTE

`` Be sure to select the correct Digital Output or you will hear no sound or just loud noise.

`` If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.

`` Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.

`` Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.

`` If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).

PCM Downsampling

Lets you set 48kHz and 96kHz PCM down- sampling on or off.

HDMI

•If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the player may output PCM 2ch downmixed audio even though you selected Bitstream (either Re-encoded or Unprocessed) in the setup menu.

•If your TV is not compatible with PCM sampling rates over 48kHz, the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off.

Dynamic Range Control

You can listen at low volumes, but still hear dialog clearly.

This is only active if your player detects a Dolby Digital signal.

Downmixing Mode

Select the Downmix method for stereo output.

Network Settings

Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic - and most are - we recommend using the Auto procedure for network setup. This is easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure. (See page 11.)

Network setup directions start below. ✎✎ NOTE

`` This unit can only be connected to a Network via a wireless connection.

Automatic Network Setup

1.In the Home menu, press the ◄► buttons to select Settings, and then press the v button.

2.Press the ▲▼ buttons to select Network, and then press the v button.

3.Press the ▲▼ buttons to select Network Setting, and then press the v button. The Network Setting screen appears.