Settings
|
| Network Setting |
|
| |||
Display Access Point Selection | : Not Selected |
|
| ||||
Audio | Internet Protocol Setup | : Auto | 0 | 0 | \ | ||
Network | IP Address | : | 0 | 0 | |||
System |
| Subnet Mask | : | 0 | 0 | 0 | 0 |
Language Gateway | : | 0 | 0 | 0 | 0 | ||
SecurityDNS | : Auto | 0 | 0 | 0 | |||
General |
| DNS Server | : | 0 | |||
Support | a WPS(PBC) > Move "Select 'Return | ||||||
|
| ||||||
4.Select Access Point Selection, and then press the v button.
The Network function searches for available wireless networks. When done, it displays a list of the available networks.
5.In the list of networks, press the ▲▼ buttons to select a network, and then press the v button.
6.If the Security Key screen appears, go to Step 7. If the Network Connecting Screen appears, go to Step 10.
7.On the Security Key screen, enter your network’s Pass Phrase.
✎NOTE✎
`` You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem.
Settings
Display | Security Key | Security Key | (0) | ||||
a | b c |
| |||||
Audio | 1 | .,@ | 3 | def | |||
Network | 2 | abc | |||||
System | 4 | ghi | 5 | jkl | 6 | mno | |
Language7 | pqrs | 8 | tuv | 9 | wxyz | ||
Security |
| a/A/1/ | 0 |
| Delete | ||
General |
|
| |||||
aClear All | bSpace | cDone | |||||
Support | |||||||
|
|
| (/)Cursor | "Select | 'Return | ||
8.To enter the Pass Phrase, follow these general directions:
•Use the arrow keys on your remote to move from button to button on the Security Key screen.
•To change the kind of characters you are entering, move to the button labeled a/A/1/, and then press the
vbutton. Each time you press the
vbutton, you change the kind of characters you can enter (a/A/1/).
•You can also change the kind of character by pressing the DISC MENU button on the remote.
•To enter a letter, press the number button that corresponds to the letter. Pressing the button repeatedly changes the letter.
•To enter a number or symbol when the Security Key screen is displaying numbers or symbols, press the corresponding number button once.
•To delete the last letter, number, or symbol you entered, move to the Delete button, and then press the
vbutton.
• To see and use additional symbols, press the [ or ] button when the Security Key screen is displaying symbols.
•To clear all entered letters, numbers, and symbols, move to the Clear All button, and then press the v button. You can also just press the RED (A) button on your remote.
9.When done, press the YELLOW (C) button on your remote, or move to the Done button, and then press the v button.
The Network Connecting screen appears.
10.Wait until the connection confirmation message is displayed, and then press the v button. The Network Settings screen reappears.
11.To test the connection, press the ▼ button to select Network Test, and then press the v button.
Manual Network Setup
If the Auto Setting does not work, you need to enter the Network settng values manually. Before you start manual network setup, you need the network setting values.
To get the Network setting values, contact your ISP or your network administrator.
To Enter the Network settings into your player, follow these steps:
1.On the Internet Protocol Setup screen, press the v button.
2.Press the ▲▼ buttons to select Manual, and then press the v button.
Settings
|
| Network Setting |
|
| |||
Display Access Point Selection | : Not Selected |
|
| ||||
Audio | Internet Protocol Setup | : Manual | 0 | 0 | \ | ||
Network | IP Address | : | 0 | 0 | |||
System |
| Subnet Mask | : | 255 | 255 | 255 | 0 |
Language Gateway | : | 0 | 0 | 0 | 0 | ||
SecurityDNS | : Manual | 0 | 0 | 0 | |||
General |
| DNS Server | : | 0 | |||
Support | aWPS(PBC) > Move " Select ' Return | ||||||
|
| ||||||
3.Press the ▼ button to go to the first entry field (IP Address).
4.Use the number buttons to enter numbers.
5.When done with each field, use the ► button to move successively to the next field.
You can also use the other arrow buttons to move up, down, and back.
6.Enter the IP Address, Subnet Mask, and Gateway values.
7.Press the ▼ to go to DNS.
8.Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.
9.When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the v button.
WPS(PBC) function
The easiest way to set up the wireless network connection is using the WPS(PBC) function.
If your wireless router has a WPS(PBC) button, follow these steps:
1.In the Network Settings menu, press the ▲▼ buttons to select Network Setting, and then press the v button.
The Internet Protocol Setup screen appears.
2.Press the RED (A) button on the remote control.
3.Press the WPS(PBC) button on your router within two minutes. Your player displays the Network Selection Screen, and automatically acquires all the network setting values it needs and connects to your network. When it is done, it displays an OK button. Press the v button on your remote.
4.After the network connection is set up, press the RETURN button to exit the Network Setting screen.
✎NOTE✎
`` To comply with the revised
11