Setup
System
Initial Settings
By adjusting the Initial Settings, you can set the language, TV aspect ratio and Network Settings, etc.
For more information on the settings, refer to the corresponding section in this user manual.
(See pages 30~45)
Internet@TV Screen Size
Set the Internet@TV Screen to the optimal size.
•Size 1 : Display smaller application icons.
You may see some black on the sides of the screen.
•Size 2 : Display normal application icons.
The image may be too large for your TV screen. 
•Size 3 : Display larger application icons.
The image may be too large for your TV screen.
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature.
To operate this function, connect this player to an Anynet+ Samsung TV with an HDMI cable.
You can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY ( 
) button on the TV’s remote control.
For more information, please see the TV user manual.
•On : Anynet+ function is on.
•Off : Anynet+ function is off.
✎NOTE
▪This function is not available if the HDMI cable does not support CEC.
▪If your Samsung TV has an nlogo, then it supports the Anynet+ function.
▪Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user manual of your TV.
BD Data Management
Lets you manage the downloaded contents you accessed through a
You can check the device information including the storage size, delete the BD data, or change the Flash memory device.
Change Device allows you to select either the player's Internal Memory or the External Memory (in a connected USB Device).
If the data to be stored from
Settings
Display | BD Data Management | |
Audio | Current Device | : Internal Memory |
System | Total Size | : 589MB |
Network | Available Size | : 588MB |
Language | Delete BD Data | \ |
Security | Change Device | : Internal Memory |
General |
|
|
Support | > Move | " Select ' Return |
Description of Device (Storage) Information on the Player
• Total Size : Total memory of the Device (Storage).
• Available Size : Available memory in the Device (Storage).
✎NOTE
▪In the external memory mode, disc playback is stopped if you disconnect the USB device in the middle of playback.
▪Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported, We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster read/write speed.
▪The Resume Play function may not work after you format the storage device.
▪The total memory available for BD Data Management may vary, depending on the conditions.
38 English