Samsung BD-E5900 Networks and the Internet, Configuring Your Network Connection, Wired Network

Page 24

Settings

Networks and the Internet

When you connect this player to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the player's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 42~45. Instructions for configuring the network connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.

If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure.

If you are connecting to a wireless network, disconnect any wired network connection before you begin.

To begin configuring your network connection, follow these steps:

1.In the Home screen, select Settings, and then press the v button.

2.Select Network, and then press the v button.

3.Select Network Settings, and then press the v button.

4.Go to the instructions for Wired networks starting below or the instructions for Wireless networks starting on page 25.

Wired Network

ĞĞWired - Automatic

After following Steps 1 to 3 above:

1.Select Start in the Network Settings screen, and then press the v button. The player detects the wired connection, verifies the network connection and then connects to the network.

ĞĞWired - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 above:

1.Select Start in the Network Settings screen, and then press the v button.

The Network Status screen appears. The player attempts to verify the network connection and fails.

Network Settings

Wired network connection failed.

 

 

 

 

MAC Address

XX:XX:XX:XX:XX:XX

 

IP Address

 

0.0.0.0

 

Previous

Subnet Mask

 

0.0.0.0

 

Gateway

 

0.0.0.0

 

IP Settings

DNS Server

 

0.0.0.0

 

Retry

Unable to connect to the network. Try the following:

 

 

 

 

OK

- check if your IP address is set correctly in IP Settings.

 

- Contact your Internet Service Provider for more information.

 

2. Select IP Settings on the right of the screen, and press the v button.

The IP Settings screen appears.

3. Select the IP Mode field, and then set it to Manual.

4. Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field.

NOTE

\\ You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Settings Values." on page 25.

5.When done, highlight OK, and then press v button. The player verifies the network connection and then connects to the network.

24 English

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Blu-rayDisc Player Safety Information Class 1 Laser productFCC Note for U.S.A Precautions Important Safety InstructionsDisc Storage & Management Handling CautionsUsing the 3D function This player does not convert 2D content into 3DCopyright Contents Using Smart Hub Smart Hub at a Glance Using the Web Browser Using Disc to DigitalBD-LIVE Playing a Registered Disc to Digital MovieDisc types and contents your player can play Getting StartedDisc and Format Compatibility Disc types your player cannot playRegion Code Logos of Discs the player can playResolution Supported FormatsVideo File Support VroMusic File Support Support RangeKHz 8, 11 Accessories Check for the supplied accessories shown belowAvchd Advanced Video Codec High Definition OPEN/CLOSE Button Display Remote Control Sensor Disc Tray Front PanelRear Panel USB HostRemote Control Tour of the Remote ControlInstalling batteries Connecting to a TV ConnectionsConnecting to an Audio System MethodConnections Wireless Network Connecting to a Network RouterWired Network Settings Initial Settings ProcedureAccess steps may differ depending on the menu you selected Home ScreenAccessing the Settings Screen Buttons on the Remote Control Used for the Settings MenuSelected item or confirm a setting Detailed Function InformationSettings Menu Functions Lets you choose to have 96Khz PCM signals Compatible with a 96Khz signalVolume of loud sounds is reduced See the digital output selection table on You are connecting them to the network Boot time On your networks You are connected to the InternetTV using an Hdmi cable Settings. The Simple Menu appears\\ Wired USB keyboards are not supported USB port on the front of the playerNetwork and Smart Hub settings Default security PIN isFunction Rating you enter unless the PIN is enteredConfiguring Your Network Connection Wired NetworkNetworks and the Internet Getting the Network Settings Values Wireless NetworkYou can setup a wireless network connection in three ways ĞĞ Wireless General ManualWi-Fi Direct ĞĞ WpspbcThrough the Wi-Fi Device Through the Player Using PBCThrough the Player Using a PIN To Set the Soft AP Security KeyAllShare Settings If you select Dont Upgrade, the player cancels the upgradeUpgrading Software By OnlineBy USB By DiscBy Downloaded Click Support on the top rightStandby Mode Upgrade Accessing the AllShare Play Screen Media PlayAllShare Play Screen at a Glance Playing Commercial Video DiscsPlaying Commercial Audio Discs Music Screen ControlsMethod Turn the player onPlaying a Disc with User Recorded Content Using the AllShare Network FunctionTo Download the AllShare Software Media PlaySmart Phone Buttons on the Remote Control used for Video Playback Using the Tools MenuControlling Video Playback Disc MenuBonusview Buttons on the Remote Control used for Music Playback Controlling Music PlaybackRepeating Tracks on an Audio CD Shuffling Tracks on an Audio CDCreating a Playlist from a CD RippingPlaying Photo Contents Using the Tools Menu when a file is highlightedLogin / Out Earliest DateEarliest to latest date MonthlyPress vbutton Then pressing the vbuttonDevice or to delete a playlist Edit Playlist VbuttonNetwork Services Using Smart HubSmart Hub at a Glance Using the Web Browser Web Browser at a GlanceUsing Disc to Digital Yellow C To switch the pointerScroll Up/Scroll Down Tools To display Tools windowRegistering a DVD Movie in Disc to Digital Playing a Registered Disc to Digital MovieAppendix Compliance and Compatibility NoticeNetwork Service Disclaimer Copy ProtectionAppendix English License Rovi Flow-Down Licence Terms Terms of Use Additional Information Digital OutputHdmi Settings Middle of playback BD Data ManagementRead/write speed Disc Menu. Press the Disc Menu buttonResolution according to the contents type Digital Output Selection Re-encodedTroubleshooting Problem SolutionIf you experience other problems Authorized service centerHdcp High-bandwidth Digital Content Protection Check if you have a firewall enabledBD-LIVE service Occurs BD-LIVE serviceRepairs Status function. SeeSpecifications WEP OPEN/SHAREDWPA-PSK TKIP/AES WPA2-PSK TKIP/AESLimited Warranty to Original Purchaser Questions or COMMENTS?
Top Page Image Contents