Sharp BD-HP35S operation manual USB Memory Management, Before using the USB memory device

SETTINGS

Before using the USB memory device	When you insert or remove a USB memory device,	5 Press a/bto select “Erase” or “Format”, then
CAUTION:	be sure to turn the main power off and make sure		press ENTER.
	that “Quick Start” is set to “No” (See page 43).		Erase: Deletes only BD-VIDEO data written on the
• Do not remove the USB memory device or unplug	1 Insert the USB memory device into the USB
			USB memory device such as BD-LIVE data.
the AC cord while the operations for “USB Memory	terminal on this player.		Format: Be aware that all data including BD-VIDEO
Management” or “Software Update Settings (Manual
	• When the wireless LAN adapter is not inserted		data and software update data will be deleted.
Update from USB memory device)” are being
	into the USB1 terminal on the rear of the player, it		• If you want to delete only the unneeded software
performed.
	is recommended that the USB memory device be		update data after the software is updated, delete
• Do not use a USB extension cable when connecting
	connected to the USB1 terminal.		the data on the USB memory device using a PC.
a USB memory device to the USB1 or USB2 terminal
on the player.	NOTE
−−Using a USB extension cable may prevent the	• A USB memory device can be used with either the
player from performing correctly.
	USB1 or USB2 terminal. When two USB memory		Erase	Erases BD-VIDEO data on USB memory.
NOTE:
	devices are connected to both terminals at the same
• SHARP cannot guarantee that all brands’ USB	time, in certain situations the USB1 terminal may give		Format	Erase all contents on USB memory
memory devices will operate with this player.	priority to Local Storage and “Erase” and “Format” are
				including protected contents.
• Only USB memory devices formatted with FAT 32/16	not available for the USB memory device connected to
are compatible.	the USB2 terminal.
When formatting a USB memory device using a PC,
perform the following settings.	Rear	6 Press a/bto select “Yes”, then press ENTER.
Format File System: FAT32
Allocation Unit Size: Default Allocation Size			• A confirmation message is displayed. Check that
			the correct USB memory device is displayed, and
	USB1 terminal
			then continue.
USB Memory Management		7
			Start the process.
The following instructions explain how to delete data			• The screen for the current operation will display.
	USB memory device
such as the Virtual Package data and the BD-LIVE
data in a USB memory device.	Front			Complete
				OK
	USB memory	8	Press ENTER.
	device	9 Press HOME or EXIT to exit.
	USB2 terminal		NOTE
	2 Press Bto turn on the power.	• Data which has been saved to the player’s internal
			memory (game score, etc.) will also be deleted.

3 Press a/bto select “Settings”, then press dor

ENTER.

4 Press a/bto select “USB Memory Management”, then press dor ENTER.

• The “USB Memory Management” screen is displayed.

•“No USB Memory” appears when no USB memory is inserted.

50