Sharp BD-HP35S Enter the 4-digit number using, During the data checking, Checking blinks

SETTINGS

NOTE

•Only USB memory devices formatted with FAT 32/16 are compatible.

When formatting a USB memory device using a PC, perform the following settings.

Format File System: FAT32

Allocation Unit Size: Default Allocation Size

•Do not extract the firmware update file to any folders other than the root directory on the USB memory device. The firmware update file must be only one file directly in the root directory.

CAUTION

•Do not remove the USB memory device or unplug the AC cord while the software is being updated.

When you insert or remove a USB memory device, be sure to turn the main power off and make sure that “Quick Start” is set to “No” (See page 43).

1Insert the USB memory device with the update file into the USB1 or USB2 terminal on this player.

•It is recommended that the USB memory device be connected to the USB2 terminal on the front of the player.

NOTE

•A USB memory device can be used with either the USB1 or USB2 terminal. When two USB memory devices are connected to both terminals at the same time, in certain situations the USB1 terminal may give priority to Local Storage and the USB1 terminal cannot be used for Software Update.

Front

USB memory device

2Press Bto turn on the power.

3Press a/bto select “Settings”, then press dor

ENTER.

4Press a/bto select “Software Update Settings”, then press dor ENTER.

5Press a/bto select “Manual Update”, then press dor ENTER.

6Press a/bto select “USB Memory”, then press

ENTER.

• If you have not yet set the PIN code, go to step 7.

7Enter the 4-digit number using 0–9.

Enter 4-digit PIN code

8Press ENTER to start checking data in the USB memory device.

Insert USB memory device containing the software update file.

OK

9During the data checking, “Checking” blinks.

Now checking the data in USB memory device.

Checking

• The current version of this unit software and the version of the update file on the USB memory

device are displayed. To update this player software		Settings
with update file, select “Yes”, and press ENTER.
Start update?
Software update file is detected in the USB memory device.
Current Ver. :	xxxxxxxxxx
Update Ver. :	yyyyyyyyyy
	Yes
	No

(Continued on the next page)

53