Sharp BD-HP24U(A) operation manual Software Update Settings, Manual Update from Network

SETTINGS

			6 During access to the network and checking the
	Software Update Settings
				latest version of firmware, “Accessing” blinks.
In this player, the software version can be updated				• The current version of this unit software and the latest
				version of the update file on the network are displayed
using either one of the following methods.				when latest version of firmware has been found.
•		Manual Update from Network		To update this player software with update file, select
•		Manual Update from USB memory device		“Yes”, and go to step 7.
				Latest version of firmware has been found.
	Manual Update from Network
				Firmware update is available.
This function allows you to perform the update				Proceed with update?	xxxxxxxxxx
				Current Version :
operation by accessing an internet connection
				Latest Version :	yyyyyyyyyy
manually to check if there is a new firmware version.
				If “Yes” will be selected, version update will start.
		NOTE
					Yes
•		Make sure that the LAN cable is connected to this player.
					No
		(See page 18.)
•		Make sure to perform the communication settings. (See
		pages 42–43.)		• If the firmware has already been updated to the latest
•		It may take time to access and download the update		version, the following message appears.
		depending on the internet connection and other factors.		Present version of firmware is latest version.
		CAUTION		You do not need to update.
•		Do not remove the LAN cable or unplug the AC cord while		Version :	xxxxxxxxxx
		downloading or updating software.

OK

1Press SETUP to display the Menu screen.

2Press a/b to select “Settings”, then press d or

ENTER.

3Press a/b to select “Software Update Settings”, then press d or ENTER.

4Press d or ENTER to move to the menu to the right.

5Press a/b to select “Network”, then press

ENTER.

•If the internet connection has failed, an error message appears.

Retry to perform the update after checking if the LAN cable connection (page 18) and internet settings (pages 42–43) are performed properly.

7Press ENTER to start updating.

Downloading latest firmware…

Version : yyyyyyyyyy

30%

8When the software is successfully updated, a screen is displayed indicating that the update process is completed.

•If the update has failed, an error message appears. Retry to perform the update after checking if the LAN cable connection (page 18) and internet settings (pages 42–43) are performed properly.

9Press POWER to turn off the player.

Settings

45