Sharp BD-HP21H operation manual Safety Information, Power Cord Protection

Introduction

OPERATION MANUAL ENGLISH

SAFETY INFORMATION

ENGLISH

Note:

This Player can be used only where the power supply is AC 100-240V, 50/60Hz. It cannot be used elsewhere.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

AS THE LASER BEAM USED IN THIS PLAYER IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

Power Cord Protection

To avoid any malfunctions of the Player, and to protect against electric shock, fire or personal injury, please observe the following.

•Hold the plug firmly when connecting or disconnecting the AC power cord.

•Keep the AC power cord away from heating appliances.

•Never put any heavy object on the AC power cord.

•Do not attempt to repair or reconstruct the AC power cord in any way.

•This Player is classified as a CLASS 1 LASER product.

•The CLASS 1 LASER PRODUCT label is located on the rear cover.

•This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.