Sharp BD-HP21H Playback Functions, Partial Repeat Playback Repeat Playback of a Specified Part

Playback Functions

Partial Repeat Playback

(Repeat Playback of a

Specified Part)

DVD VIDEO DVD-R DVD-RW

AUDIO CD

NOTE

•Some operations in the following playback function cannot be performed depending on the specifications of the disc.

1Press REPEAT during playback.

2Press c/d to select “SCENE SELECTION”, then press ENTER.

PLAYBACK TITLE	PLAYBACK CHAPTER	SCENE SELECTION
		SET START POINT

3“SET START POINT” displays. Press ENTER at the scene where you want.

• “SET END POINT” displays.

4Press ENTER at the scene where you want to set the end point.

•You can press VFWD to fast forward to the scene where you want to set the end point. When you reach the desired scene, simply press IPLAY and then ENTER to set the end point. To cancel Repeat Playback, press REPEAT.

NOTE

•Press LSKIP/l, the Repeat Playback is cancelled and the next chapter being play back.

•Press KSKIP/k once, the Repeat Playback is cancelled and the player returns to the start of current chapter (track).

•If you press KSKIP/k again (within about 5 seconds) the player will skip to the beginning of the previous chapter (track).

•For Partial Repeat Playback, set the start and end points within the same title.

•Repeat Playback may be forbidden depending on the disc.

•Partial Repeat Playback may not work in multi- angle scenes.

•If you press DISPLAY, you can confirm the Repeat Playback status.

Switching Audio

You can change the audio output channel using

AUDIO.

Each time AUDIO is pressed, the audio channels (2 channels or multi audio) change as follows:

BD VIDEO DVD VIDEO

The newly selected audio track will be displayed.

DVD-RW DVD-R

When a recorded broadcast with stereo or monaural audio is played back:

“Stereo” is displayed. (Audio cannot be switched.)

NOTE

•When you play a programme recorded in stereo or monaural, and if you are listening to the BITSTREAM sound via the digital output jack, you cannot select the audio channel. Set “AUDIO OUT” to “PCM” (page 36), or if you want to change the audio channel, listen via the analogue output jacks.

Switching Subtitles

If subtitles are provided in multiple languages, you can switch between them.

Press SUBTITLE during playback.

•The display indicates the subtitle number currently being played back, and the subtitles appear.

Each time SUBTITLE is pressed, the subtitles change.

•“– –” is displayed if a disc has no subtitles.

•You can also select “OFF”.

p Disc Playback

29