Sony BDP-S360 Easy Setup, Code numbers of controllable TVs, When turned on for the first time

1While holding down TV [/1, enter the TV’s manufacturer code using the number buttons.

For instance, to enter “09,” press “0” then “9.”

Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer	Code number
Sony	01 (default)
Hitachi	02
LG/Goldstar	04
Mitsubishi/MGA	13
NEC	04

Step 7: Easy Setup

Follow the steps below to make the minimum number of basic adjustments for using the player. If you do not complete Easy Setup, it will appear each time you turn on your player.

Make the settings below in the following order.

When turned on for the first time

Wait for a short while before the player turns on and starts Easy Setup.

Hookups and Settings

Panasonic	19
Philips	21
Pioneer	16
RCA	10
Samsung	20
Sharp	18
Toshiba	07

2Release TV [/1.

TV [/1

[/1

</M/m/,,

ENTER

HOME

1 Turn on the TV.

2 Press [/1 to turn on the player.

The player turns on after a moment.

3 Switch the input selector on your TV so that the signal from the player appears on your TV screen.

The display for OSD language selection appears.

•If the display for OSD language selection does not appear

Press HOME, and select “Easy Setup” in the “Setup” setup (page 53). Then, select “Start,” and press ENTER.

,continued 27