Identifi cation of Controls
Operating with the remote control
Point the remote control at the remote sensor and press the buttons.
POWER
Distance: About 5 m from the front of the remote sensor.
Angle:
About 30° in each direction of the front of the remote sensor.
*Do not expose the remote sensor of the
Notes:
•Direct the remote control at the remote sensor of the
•When using the remote control, press the buttons at intervals of about 1 second to ensure the correct mode of operation.
•Do not drop or give the remote control a shock.
•Do not leave the remote control near an extremely hot or humid place.
•Do not spill water or put anything wet on the remote control.
•Do not open the remote control.
•If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.
Connections
Connecting to a TV using an HDMI® cable
This connection provides better picture quality and supports up to 1080i/1080p, 1080p/24F resolution. Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV.
High
Definition
TV
HDMI Cable |
|
(only included for |
|
BDK21KU model) | HDMI IN |
HDMI OUT
Notes:
•HDMI connection is required. Cables are not included for BDX2150KU model. Analog connection is not supported.
•Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
•When using a
•An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an additional audio connection if you are using an HDMI cable.
10