Toshiba BDX3000KU WiFi Protected Setup WPS, Press the WPS button on the top of your router

Function setup

Customizing the Function Settings

Done 1 2 3 4 5 6 7 8 9 0 q w e r t y u i o p a s d f g h j k l ; z x c v b n m , . / Space ` - = \ [ ] '

4.Use / / / to highlight Done on the upper-right corner of the keyboard, and press OK to remove the keyboard from the screen.

5.Use to highlight Connect, and press OK. If the

wireless network is functioning, icon and a message “Connection to XXX...Success” will appear on the TV.

6.Press OK to close the message. The BD player is now connected to the network. From now on, when you turn on the player, it will automatically connect to the network; there is no need to repeat these steps again.

Notes:

•If you do not see this message, the BD player was not able to connect to the network.

•If the wireless network is encrypted using an unsupported encryption (it appears in the network list with an icon), you cannot connect to the network. You must change the router’s encryption type before proceeding.

II.Connection to the wireless Network using Wi-Fi protected Setup(WPS)

1.Press / to select Network in stop mode, then press button to enter the following screen:

Wireless

Network List

WiFi Protected Setup (WPS)

Manual

IP Settings

a.If the BD player is connected to a Wireless Network Using WPS Pushbutton:

2.Press / to select WiFi Protected Setup (WPS), then press OK.

WiFi Protected Setup (WPS)

Please press the button on your router now

Network Name (SSID)

Cancel

3.Press the WPS button on the top of your router.

4.Once you see “Success” on the button at the bottom of the screen, the BD player is connected to the router.

Note: If you do not see this message, the BD player was not able to connect to the network. Repeat steps 1-4 again.

b.If the BD player is connected to a Wireless Network Using WPS PIN:

2.Press / to select Network List, then press OK. A list of existing wireless networks near the BD player will appear (It may take several seconds for this list to be created). For example:

	Network List
WiFi a	WiFi-me*
WiFi b g n	Panda
WiFi a	dlink_media
WiFi b g	NTGR 11g
WiFi b g	Airport_SN

3.Press / to select the desired wireless network, and press OK to confirm.

4.Press / to highlight WPS PIN, and press OK. The following screen will appear:

WiFi-me

Password

Connect WPS Pin Cancel

Press ENTER to open keyboard

Password is case-sensitive

5.Press / to highlight connection method you desire, and press OK.

6.Follow the on-screen message to continue operating the connection.

III.Connection to the wireless Network using Manual IP Configration

1.In the “Wireless” menu, press / to select Manual, then press OK.

Wireless

Network List

WiFi Protected Setup (WPS)

Manual

IP Settings

2.Follow the on-screen message to continue operating the connection.

38