Toshiba BDX5400 owner manual Customizing, Audio, Spdif, Hdmi

6 Customizing

This section describes the various setting option of this Blu-ray DiscTM player.

If the setup option is greyed out, it means the setting cannot be changed at the current state.

1.Press the SETTING button in stop mode to display the setup screen.

2.Press OK to enter the Setting menu.

3.Use / to select an option and press OK.

4.Press or the RETURN button to return to the previous menu.

Audio

1.In Setting menu, use / to select Audio and press OK.

2.Press / to select an option and press OK.

3.Use / to select the desired audio setting and press OK.

4.Press or the RETURN button to return to the previous menu.

[SPDIF]

When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:

{Bitstream} - Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby or DTS or PCM audio signal.

{PCM} - Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo audio signal.

{Re-encode} - Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby or DTS and you want to hear both PIP audio and the movie audio on Blu-ray™ video.

{Off} - No audio will be output via COAXIAL DIGITAL output jack.

[HDMI]

When you connected a HDMI device to the HDMI OUT jack, the available options are:

{Bitstream} - Selects Bitstream output if your receiver HDMI IN supports Dolby or DTS or PCM audio signal.

{PCM} - Selects PCM output if your receiver HDMI IN only supports PCM audio signal.

{Re-encode} - Selects Re-encode if your receiver’s HDMI IN supports Dolby or DTS and you want to hear both PIP audio and movie audio on Blu-ray™ video.

{Off} - No audio will be output via HDMI OUT jack.

[Down_samp]

Select the digital audio signal sampling frequency. (Only Coaxial)

{48k} - For discs recorded at sampling rate of 48 kHz.

{96k} - For discs recorded at sampling rate of 96 kHz.

{192k} - For discs recorded at sampling rate of 192 kHz.

[Dolby DRC]

Select the Dynamic Range Control mode which makes it available to listen to a movie at a low volume without losing sound clarity.

{Off} - Non-dynamic range compress. {On} - Dynamic range compress.

{Auto} - Adjust the DRC according to input audio.

The setting of Auto is effective for Dolby TrueHD.

[Stereo Down Mix]

Select whether to downmix the multi-channel audio into fewer channels.

{Stereo} - Downmixes the multi-channel audio into two channel stereo. Choose when the Blu-ray Disc™ player is connected to equipment that does not support virtual surround function such as Dolby Pro Logic.

{Surround Encoded (Lt/Rt)} - Downmixes the multichannel audio into surround compatible stereo. Choose when the Blu-ray Disc™ player is connected to equipment that supports virtual surround function such as Dolby Pro Logic.

System

1.In Setting menu, use / to select System and press OK.

2.Use / to select an option and press OK.

3.Press or the RETURN button to return to the previous menu.

English

15