PIP Mark, Secondary Audio, Last Memory, TV Screen

English

[PIP Mark]

The Picture -In- Picture (PIP) mode display two pictures on the TV screen at the same time, the full screen picture is called Main Window and the small inset window is called Sub Window. The PIP mark is displayed when in PIP mode and PIP Mark is set to ON.

{On} - Display the PIP mark. {Off} - Hide the PIP mark.

[Secondary Audio]

{On} - Display Secondary Audio. {Off} - Hide the Secondary Audio.

[Last Memory]

If you open the disc tray or switch this Blu-ray Disc™ player to standby state during normal playback, the Blu-ray Disc™ player can memorize the end playing point, the player will start playback from the memorized point next time.

{On} - Active Last Memory feature. {Off} - Disable Last Memory feature.

Note:

- Not all the Blu-rayTMdiscs can support this function.

Display

1.In Setting menu, use / to select Display and press OK.

2.Press / to select an option and press OK.

3.Use / to select the desired option, and press OK to conﬁrm.

4.Press or the RETURN button to return to the previous menu.

[TV Screen]

Select the screen format according to how you want the picture to appear on the TV.

{16:9 Full} - For a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen.

{16:9 Normal} - For a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display.

{4:3 Pan&Scan} - For standard TV, it displays a wide picture on the entire screen and cuts off the redundant portions.

{4:3 Letterbox} - For standard TV, it displays a wide picture with two black borders on the top and bottom of 4:3 screen.

[Resolution]

Select a video output resolution that is compatible with your TV display capability.

{Auto} - Select the most suitable resolution according to the TV.

{480i/576i, 480p/576p, 720p, 1080i, 1080p}

-Select a video resolution setting that is best supported by the TV. See TV manual for details.

[Color Space]

Select a predeﬁned Color Space of picture. {RGB} - Select RGB Color Space. {YCbCr} - Select YCbCr Color Space. {YCbCr422} - Select YCbCr422 Color Space. {Full RGB} - Select Full RGB Color Space.

[HDMI Deep Color]

This feature is available only when the display device is connected by a HDMI cable, and when it supports Deep Color feature.

{On} - Enable HDMI Deep Color.

{Off} - Disable HDMI Deep Color.

[HDMI 1080/24p]

{On} - Enable 1080/24p video resolution setting. {Off} - Disable 1080/24p video resolution setting.

Notes about HDMI 1080/24p:

If you want the 1080/24p output, it should fulﬁll below

3 conditions:

1.TV supports the 1080/24p display;

2.Player choose the 1080/24p option in the setting menu;

3.Media must be the 1080/24p video.

Note:

-This resolution becomes eﬀective only when the playing Blu-ray Disc™ contents are Film source.

[Blu-ray 3D Mode]

Select whether to play a Blu-ray Disc™ with 3D contents in 3D Mode.

{Auto} - The 3D Blu-ray Disc™ is played in 3D mode if your product detects a TV that supports it. It is played in 2D mode if your product detects a TV which can not support it.

{Off} - The 3D Blu-ray Disc™ is played in 2D mode at all times. Select this option to view a picture without 3D effect or when a TV cannot support 3D Blu-ray™ discs.

[Video Adjust]

{Brightness} - Press / to adjust the brightness of display, goes left means dark and right means bright.

{Contrast} - Press / to adjust the contrast of display, goes left means low contrast and right means high contrast.

{Hue} - Press / to adjust the Hue of display, goes left means low hue and right means high hue.

{Saturation} - Press / to adjust the saturation of display, goes left means low Saturation and right means high saturation.