Integra DBS-30.2, E5SF1UD manual Opening Screen, Open the cover Insert batteries, Close the cover

Page 12

FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

Install 2 AA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control.

1Open the cover.

2Insert batteries.

Using a Remote Control

Keep in mind the following when using the remote control:

•Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit.

•Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit.

•Replace the batteries when you notice a fall off in the operating range of the remote control.

•The maximum operable ranges from the unit are as follows.

Remote control sens

Make sure to match + and - on the batteries to the marks indicated in the battery compartment.

3Close the cover.

30˚

DBS-30.2

30˚

Note

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

•Do not mix new and old batteries together.

•Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages.

•Make sure that the + and - ends of each battery match the indications in the battery compartment.

•Remove batteries from battery compartment that is not going to be used for a month or more.

•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.

•Do not recharge, short-circuit, heat, burn or disassemble batteries.

Opening Screen

In stop mode and “Mode Select“ is set to “Network“, opening screen is displayed.

Home Network

“NETFLIX“: To access the Netflix screen

“CinemaNow“: To access the CinemaNow menu screen

“BLOCKBUSTER“: To access the Blockbuster menu screen

“Home Network“: To access the list of DLNA home server

12

EN

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DBS-30.2 Symbol for Class ll Double Insulation ApparatusIf the apparatus has been dropped or damaged in any way, Precautions Precautions For U.S. ModelsFor Canadian Models Modèle pour les CanadienSupplied Accessories Maintenance ServicingIR signal check Disc handlingTrademark Information Blu-ray DiscContents Features FeaturesPIP Bonusview Features Symbols Used in this ManualSymbol Description Control Connector RS-232 Functional OverviewFront Panel Rear PanelRemote Control Functional OverviewInstalling the Batteries in the Remote Control Using a Remote ControlOpening Screen Open the cover Insert batteriesFront Panel Display Example of Display MessageDTS audio is being played back Loading a disc Connections Connection to the TVHdmi Output Mode and Actual Output Signals Hdmi Audio SettingConnections Copyright protection systemAudio signals output from Hdmi OUT jack Full decodedDolby TrueHD stream is decoded Only the core substream is decodedConnection to an Audio System Channel Analog Audio ConnectionDigital Audio Connection Audio Output Analog L / RLpcm Connecting the AC Cord Network Connection with LANAC cord LAN cable InternetControlling AV Components that are Out of Range Controlling Other Out-of- Range AV ComponentsInformation on Playback Playable Discs and FilesPlayable discs Disc/Card/Media TypeInformation on Playback Chapter information Disc informationFile name information Title informationBasic Playback Playing Back a BD, DVD or a Disc with Avchd FilesPress On / Standby Press Open / Close a to close the disc trayOperations Using Title Menu Disc Menu, and Pop-up Menu Basic PlaybackPlaying Back an Audio CD or a Disc with MP3/WMA/JPEG Files Stop mode, press Setup Reading the SD Memory CardUse K/ L to select , then press EnterPress Setup to exit Press EnterSlot until it clicks Set up the necessary network Connection settingsWant to access, then press Enter Connect this unit to the InternetDlna Error Code Dlna Client DMP Our Planning SpecificationError Code Form Summary Error messageSpecial Playback Fast Forward / Fast ReverseRepeat Playback Slow Forward PlaybackSpecial Playback RepeatStop mode, press Mode twice Random PlaybackPress Play B to start program playback Press Play B to start random playbackRapid Playback Enjoying BD-Live Discs with InternetCamera Angle Search Title SearchChapter Search Track / File SearchSpecial Settings Switching SubtitlesSwitching Audio Soundtrack Special Settings Setting the BD Audio ModeAdjusting the Picture Use K/ L to select your desired settingNetflix Operations Before Activating the Connection to NetflixActivating the Connection to Netflix Watching Streaming MoviesBefore Activating the Connection to CinemaNow / Blockbuster Activating the Connection to CinemaNow / BlockbusterGuide to CinemaNow / Blockbuster Menu Screen Cinemanow / Blockbuster Operations Renting or Purchasing Movies / TV EpisodesSearching Movies / TV Episodes Function Setup Using the Setup MenuFollow the procedure below Depending on the setting itemsFunction Setup Use K/ L to select your desired Setting itemsFollow the procedure below Depending on the setting items Setting category, then press EnterSetting items Options LanguageSubtitle Disc MenuHdmi Video Resolution VideoTV Aspect Component OutputProgressive Mode Still Mode*1BD Audio Mode AudioHdmi Audio Out Down SamplingDigital out setting Speaker settingQuick Hdmi Audio Out Audio Mute Digital Out For Default Press Enter to reset to the default Menu Setting items Options DescriptionsSpeaker Size Channel LevelDelay Time Setting items Options DescriptionsMenu Press Setup to exit ParentalProceed to a C AllOthers Hdmi CECSoftware Update Allows you to update this unit’s firmware Direct ChangeStandby System Information Get & Set Menu LanguageEnableEasy EnableCustomUse K/ L to select EnableCustom, then press Enter Network ConnectionProxy Setting Follow steps 1 to 4 in Connection Test on For default settings, select Do Not UseBD-Live Setting Connection Speed10BASE Half 10BASE FullSoftware Update Press Enter or Return to exitConfirmation message will appear InitializeUse K/ L to select a desired option Use K/ L to select Yes, then pressTroubleshooting ProblemSolution Troubleshooting Glossary Glossary Language Code Language CodeSpecifications GeneralTerminals Network Service Disclaimer Network Service DisclaimerE5SF1UD / 1VMN29753

E5SF1UD, 1VMN29753, DBS-30.2 specifications

The Integra DBS-30.2 is a high-performance audio device designed for audiophiles and home theater enthusiasts seeking superior sound quality and versatile connectivity options. This receiver is engineered to deliver an immersive listening experience, standing out in its category due to its array of advanced features and technologies.

One of its main features is the robust amplification system, which ensures that every sound is reproduced with clarity and precision. The DBS-30.2 boasts a powerful amplifier section that is capable of producing high output power across a range of frequencies, allowing users to enjoy dynamic audio whether they are watching movies or listening to music. The receiver is designed to handle demanding speaker loads while maintaining high levels of fidelity.

The receiver includes support for various surround sound formats, including Dolby Atmos and DTS:X. These technologies enable the creation of a three-dimensional sound environment, allowing listeners to immerse themselves in the audio experience as if they were part of the action. With these formats, the DBS-30.2 can decode and play back multi-channel audio, enhancing the overall experience of both films and music.

In terms of connectivity, the Integra DBS-30.2 is equipped with a wide variety of input and output options. HDMI inputs allow for seamless connection to modern video sources, while legacy connections ensure compatibility with older devices. Additionally, it features built-in Wi-Fi and Bluetooth capabilities, facilitating easy streaming of music from mobile devices and other wireless sources.

The user interface is intuitive, featuring an on-screen display that simplifies navigation through the receiver's vast array of settings and options. Furthermore, the receiver is designed with calibration technology that automatically adjusts sound settings based on the room's acoustics, optimizing performance for different listening environments.

The build quality of the Integra DBS-30.2 is also noteworthy, employing premium materials and craftsmanship that enhance not only durability but also aesthetic appeal. The sleek design allows it to integrate seamlessly into home entertainment systems.

In summary, the Integra DBS-30.2 is an exceptional audio receiver that combines advanced technologies and features, making it a worthwhile addition for anyone passionate about high-quality sound and home theater systems. Whether for casual listening or a full home cinema experience, this device stands as a powerful tool in the pursuit of audio excellence.
Top Page Image Contents