Integra DBS-30.2, E5SF1UD, 1VMN29753 manual Troubleshooting, Problem, Solution

Page 57

TROUBLESHOOTING

If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist.

Problem

No power.

Solution

-Check if the AC cord is properly connected.

-Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.

No sound or picture.

- Check if the connected TV or AV receiver is turned on.

 

-

Check if the connections are made securely and correctly.

 

- Check whether the connected TV, AV receiver or other device supports HDCP.

 

 

(This unit will not output a video signal unless the other device supports HDCP.)

 

- Check whether the output format of this unit (HDMI FORMAT) matches the

 

 

supported input format of other connected device.

 

- When this unit is connected to the DVI jack on your TV or AV receiver, you cannot

 

 

hear any sound from the HDMI OUT jack if your TV or AV receiver only supports DVI.

 

- When the display device does not support the desired video resolution, press and

 

 

hold [Play B] on the front panel for more than 5 seconds. Both settings will be

 

 

reset to the default automatically.

No audio / video signal on the

- If the unit is connected the unauthorized display device with an HDMI cable, the

display device via HDMI cable.

 

audio / video signal may not be output.

 

-

Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable from the TV,

 

 

AV receiver and this unit and then reconnect it to both the devices while they are

 

 

powered on.

 

-

Ensure that your HDMI cable is certified.

Distorted picture.

- Sometimes a small amount of picture distortion may appear.

 

 

This is not a malfunction.

 

- Connect this unit directly to the TV. If the RCA audio / video cables are connected

 

 

to a VCR, pictures may be distorted due to the copy right protection system.

Completely distorted picture or

-

Make sure the disc is compatible with this unit.

black / white picture with

 

 

BD / DVD.

 

 

No sound or distorted sound.

- Adjust the volume.

 

-

Check that the speakers are connected correctly.

 

-

Check the HDMI connections.

 

- Check the settings in “Audio” menu.

Picture freezes momentarily

-

Check the disc for fingerprints / scratches and clean with a soft cloth wiping from

during playback.

 

center to edge.

 

-

Clean the disc.

Disc cannot be played back.

-

Clean the disc.

 

-

Ensure the disc label is facing up.

 

-

Check if the disc is defective by trying another disc.

 

-

Cancel the ratings control or change the control level.

 

-

Insert a correct disc that can be played back on this unit.

SD Memory Card cannot be read.

- The format of the card does not match to this unit or the card is not compatible.

 

 

(Refer to page 21.)

No return to start-up screen when disc is removed.

- Reset this unit by turning it off, then on again.

The unit does not respond to the

- Aim the remote control directly at infrared sensor window on the front panel.

remote control.

- Reduce the distance to infrared sensor window.

 

-

Replace the batteries in the remote control.

 

- Re-insert the batteries with their polarities (+ / - signs) as indicated.

 

-

Check if a strong light source is not interfering with this unit’s infrared sensor.

 

 

Make sure that the unit is not subjected to direct sunshine or inverter-type

 

 

fluorescent lights. Relocate if necessary.

 

-

If the BD player is installed in a cabinet with colored glass doors, the remote

 

 

control may not work reliably when the doors are closed. Open the doors, or use a

 

 

cabinet without colored glass.

Buttons do not work or the unit

- To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.

stops responding.

 

 

The unit does not respond to some operating commands during playback.

-Operations may not be permitted by the disc. Refer to the instructions of the disc.

 

The unit cannot read

-

Condensation? (Let sit 1 or 2 hours)

 

BD / DVD / CD.

- You are attempting to playback a disc other than one with one of the marks on page 21.

 

 

-

Wipe the dirt off the disc or replace the disc.

 

 

Angle does not switch.

- The angle cannot be switched for BD / DVD which do not contain multiple angles.

 

 

 

In some cases multiple angles are only recorded for specific scenes.

EN

 

 

 

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents DBS-30.2 Symbol for Class ll Double Insulation ApparatusIf the apparatus has been dropped or damaged in any way, Precautions For U.S. Models PrecautionsFor Canadian Models Modèle pour les CanadienMaintenance Servicing Supplied AccessoriesIR signal check Disc handlingBlu-ray Disc Trademark InformationContents Features FeaturesPIP Bonusview Features Symbols Used in this ManualSymbol Description Functional Overview Control Connector RS-232Front Panel Rear PanelFunctional Overview Remote ControlUsing a Remote Control Installing the Batteries in the Remote ControlOpening Screen Open the cover Insert batteriesFront Panel Display Example of Display MessageDTS audio is being played back Loading a disc Connection to the TV ConnectionsHdmi Audio Setting Hdmi Output Mode and Actual Output SignalsConnections Copyright protection systemFull decoded Audio signals output from Hdmi OUT jackDolby TrueHD stream is decoded Only the core substream is decodedChannel Analog Audio Connection Connection to an Audio SystemDigital Audio Connection Audio Output Analog L / RLpcm Network Connection with LAN Connecting the AC CordAC cord LAN cable InternetControlling Other Out-of- Range AV Components Controlling AV Components that are Out of RangePlayable Discs and Files Information on PlaybackPlayable discs Disc/Card/Media TypeInformation on Playback Disc information Chapter informationFile name information Title informationPlaying Back a BD, DVD or a Disc with Avchd Files Basic PlaybackPress On / Standby Press Open / Close a to close the disc trayOperations Using Title Menu Disc Menu, and Pop-up Menu Basic PlaybackPlaying Back an Audio CD or a Disc with MP3/WMA/JPEG Files Reading the SD Memory Card Stop mode, press SetupUse K/ L to select , then press EnterPress Setup to exit Press EnterSlot until it clicks Connection settings Set up the necessary networkWant to access, then press Enter Connect this unit to the InternetDlna Client DMP Our Planning Specification Dlna Error CodeError Code Form Summary Error messageFast Forward / Fast Reverse Special PlaybackRepeat Playback Slow Forward PlaybackRepeat Special PlaybackRandom Playback Stop mode, press Mode twicePress Play B to start program playback Press Play B to start random playbackRapid Playback Enjoying BD-Live Discs with InternetCamera Angle Title Search SearchChapter Search Track / File SearchSpecial Settings Switching SubtitlesSwitching Audio Soundtrack Setting the BD Audio Mode Special SettingsAdjusting the Picture Use K/ L to select your desired settingBefore Activating the Connection to Netflix Netflix OperationsActivating the Connection to Netflix Watching Streaming MoviesBefore Activating the Connection to CinemaNow / Blockbuster Activating the Connection to CinemaNow / BlockbusterGuide to CinemaNow / Blockbuster Menu Screen Cinemanow / Blockbuster Operations Renting or Purchasing Movies / TV EpisodesSearching Movies / TV Episodes Using the Setup Menu Function SetupFollow the procedure below Depending on the setting itemsUse K/ L to select your desired Setting items Function SetupFollow the procedure below Depending on the setting items Setting category, then press EnterLanguage Setting items OptionsSubtitle Disc MenuVideo Hdmi Video ResolutionTV Aspect Component OutputStill Mode*1 Progressive ModeAudio BD Audio ModeHdmi Audio Out Down SamplingDigital out setting Speaker settingQuick Hdmi Audio Out Audio Mute Digital Out Menu Setting items Options Descriptions For Default Press Enter to reset to the defaultSpeaker Size Channel LevelDelay Time Setting items Options DescriptionsMenu Parental Press Setup to exitProceed to a C AllHdmi CEC OthersDirect Change Software Update Allows you to update this unit’s firmwareStandby System Information Get & Set Menu LanguageEnableCustom EnableEasyUse K/ L to select EnableCustom, then press Enter Network ConnectionFor default settings, select Do Not Use Proxy Setting Follow steps 1 to 4 in Connection Test onConnection Speed BD-Live Setting10BASE Half 10BASE FullPress Enter or Return to exit Software UpdateInitialize Confirmation message will appearUse K/ L to select a desired option Use K/ L to select Yes, then pressTroubleshooting ProblemSolution Troubleshooting Glossary Glossary Language Code Language CodeSpecifications GeneralTerminals Network Service Disclaimer Network Service DisclaimerE5SF1UD / 1VMN29753

E5SF1UD, 1VMN29753, DBS-30.2 specifications

The Integra DBS-30.2 is a high-performance audio device designed for audiophiles and home theater enthusiasts seeking superior sound quality and versatile connectivity options. This receiver is engineered to deliver an immersive listening experience, standing out in its category due to its array of advanced features and technologies.

One of its main features is the robust amplification system, which ensures that every sound is reproduced with clarity and precision. The DBS-30.2 boasts a powerful amplifier section that is capable of producing high output power across a range of frequencies, allowing users to enjoy dynamic audio whether they are watching movies or listening to music. The receiver is designed to handle demanding speaker loads while maintaining high levels of fidelity.

The receiver includes support for various surround sound formats, including Dolby Atmos and DTS:X. These technologies enable the creation of a three-dimensional sound environment, allowing listeners to immerse themselves in the audio experience as if they were part of the action. With these formats, the DBS-30.2 can decode and play back multi-channel audio, enhancing the overall experience of both films and music.

In terms of connectivity, the Integra DBS-30.2 is equipped with a wide variety of input and output options. HDMI inputs allow for seamless connection to modern video sources, while legacy connections ensure compatibility with older devices. Additionally, it features built-in Wi-Fi and Bluetooth capabilities, facilitating easy streaming of music from mobile devices and other wireless sources.

The user interface is intuitive, featuring an on-screen display that simplifies navigation through the receiver's vast array of settings and options. Furthermore, the receiver is designed with calibration technology that automatically adjusts sound settings based on the room's acoustics, optimizing performance for different listening environments.

The build quality of the Integra DBS-30.2 is also noteworthy, employing premium materials and craftsmanship that enhance not only durability but also aesthetic appeal. The sleek design allows it to integrate seamlessly into home entertainment systems.

In summary, the Integra DBS-30.2 is an exceptional audio receiver that combines advanced technologies and features, making it a worthwhile addition for anyone passionate about high-quality sound and home theater systems. Whether for casual listening or a full home cinema experience, this device stands as a powerful tool in the pursuit of audio excellence.
Top Page Image Contents