CR104 remote, Select the source key first | Arcam BDP300 specification

The CR104 remote

The CR104 is a sophisticated ‘universal’ remote control that can control up to eight devices – including the BDP300.remoteAs it’s a ‘learning’ remote, it can copy almost any function from an existing single-device remote. You can alsocontrolprogram the CR104 to issue a sequence of commands (‘macros’) from a single button press.

Select the source key first

Remember to select a source key before pressing command buttons – commands vary depending on the source selected.

To operate the BDP300 from the remote, first press the BD source button.

BD SAT AV TUN

AMP PVR VCR CD

DISP (display)

Press to cycle through the front panel display’s brightness options (dim to bright, off).

Source selection and handset configuration

BD	BD input/BD controls
SAT	Satellite decoder input/SAT controls
AV	Television (sound) input/AV controls
TUN	Radio tuner input/TUN controls
AMP	Arcam amplifier
PVR	Personal Video Recorder input/controls
VCR	Video Cassette Recorder input/controls
CD	CD player input/CD controls

Press the relevant button once to select input and reconfigure the handset.

Press and hold the button until the power LED blinks once if you wish to reconfigure the handset without changing the input.

Navigation buttons

Arrow buttons allow navigation around the settings menus on the BDP300 and disc menus.

Confirm a selection by pressingO.

MODE

This button activates the Picture-in-Picture Secondary Video function, where available.

MUTE

Press once to mute an Arcam amplifier. Press again (or use +/– volume) to un-mute.

VOLUME +/–

Adjusts the volume of an Arcam amplifier.

OPEN

Opens and closes the disc tray.

SETUP

Press SETUP to access the system settings menu.

CANCEL			RPT
DISP		TV	RND
DISP		AV	RND
		AV
	HDMI		NET
SHIFT	STATUS		iPOD

SAT	AV
BD	TUN
PVR	VCR
AMP	CD

MODE			MENU
		RTN
		CH
DIRECT	EQ	EFFECT	BASS
TRIM	SYNC	ANGLE/SUB	TREBLE
			SRCH
FAV +	FAV -	HOME	INFO

SETUP TITLE AUDIO SUBT

CR104

On/Standby

This allows the BDP300 to be put into and taken out of standby remotely.

Numeric keys, 0–9

Used for data entry. Also gives direct access to individual tracks on audio CDs.

RND

Toggles random (‘shuffle’) play of chapters/tracks on and off.

Press Sfollowed by R to cycle through repeat play options (chapter, title, disc, etc.).

STATUS

Toggles the disc information display.

Press S followed by STATUS to cycle through the HDMI output resolutions (only available from the Home screen).

Activates the BD ‘popup’ menu or the DVD Video menu.

RTN

Navigates to the previous menu.

Press to skip backwards to the previous track(0) or forwards to the next track (/).

Playback control

Play (4), Pause (;) and Stop (<).

SHIFT+; activates slow playback.

Advanced controls

These buttons are described on the next page.

E-12