Installation 17
Resolution Setting
The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.
1.Press HOME ( 
).
2.Use 
to select the [Setup] and press ENTER (
). The [Setup] menu appears.
3.Use 
to select [DISPLAY ] option then press 
to move to the second level.
NOTE
•If your TV does not accept the resolution you have set on the player, you can set resolution to
576p as follows:
1. Press 
to open the disc tray.
2 Press 
(STOP) for more than 5 seconds.
•Since several factors affect the resolution of video output, see“Video Output Resolution”on page 58.
•When you set the HDMI Resolution, over 720p is not outputted to Composit Video.
3
Installation
4.Use 
to select the [Resolution] option then press ENTER (
) to move to the third
level.
5.Use 
to select the desired resolution then press ENTER (
) to confirm your selection.