LG Electronics BP540 owner manual Initial Setup

	System Setting 21
Initial Setup	5. Use W/S/A/Dto select the IP mode
	between [Dynamic] and [Static].
	Normally, select [Dynamic] to allocate an IP
When you turn on the unit for the first time, the	address automatically.
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press 1(POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/Dto select a display language
and press ENTER (b).	6. Select [Next] and press ENTER (b) to apply
	network settings.

3.Read and prepare the preparations for the network settings and then press ENTER (b)

while [Start] is highlighted.	Network connection status is displayed on the
	screen.
	For details on network settings, refer to
	“Connecting to your Home Network” on page
	16.
	7. Check all the settings that you have set in the
	previous steps.

If wired network is connected, the network connection setting will automatically be finished.

4.All available networks are displayed on the screen. Use W/Sto select [Wired Network]

or desired SSID of wireless network and press

ENTER (b).Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any

settings to be changed, use W/S/A/Dto select 1and press ENTER (b).

8. Displays private sound mode guide. Press ENTER (b).

If you have security on your access point, you need to input the security code as necessary.

3

System Setting