LG Electronics BP540 owner manual Connecting to an Amplifier, About Digital Multi-channel sound

14Connecting

2

Connecting

,,Note

yy If your TV does not accept the resolution you have set on the player, you can set resolution to 480p as follows:

1.Press Bto open the disc tray.

2.Press Z(STOP) for more than 5 seconds.

yy If you select a resolution manually and then

connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change,

if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.

yy The 1080p video output frame rate may be automatically set to either 24 Hz or

60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc.

Connecting to an

Amplifier

Make one of the following connections, depending on the capabilities of your existing equipment.

yy HDMI audio connection (page 15) yy Digital audio connection (page 15)

Since many factors affect the type of audio output, see “Audio Output Specifications” for details (page 61).

About Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this, you need a multi- channel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the logos on the front of the Audio/ Video receiver and the manual. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)