55
for SD-Jukebox Ver.4.) (It may be unable
to check in depending on a SD-Jukebox’s
version.)
≥Do not use the personal computer
(Explorer) to format it. Otherwise, it may
not be recognized by the SD Video
Camera.
≥If the write protection switch of the SD
Memory Card is set to [LOCK], data
cannot be erased.
≥When the Memory Card is formatted, the
files will be deleted, even if files are
locked.
≥As formatting erases all the data, save the
necessary data on a personal computer,
etc. beforehand.
≥Formatting may take a little time. Wait until
the Card Access Lamp goes out.
≥While formatting a card, you should not
remove the Memory Card or turn off the
power. The card may be damaged.
ªInstalling SD-MovieStage Ver.2.5 (l38)≥If you failed to install DirectX 9.0b when
installing SD-MediaStage Ver.2.5, click
[DirectX] on the installation screen or
double-click [dxsetup.exe] in [DirectX90b]
on the CD-ROM (supplied) and follow the
instructions on the screen to install
DirectX 9.0b.
ªConnecting to the PC (l40)≥To erase pictures that you recorded on the
Memory Card by using the SD Video
Camera, be sure to erase them on the SD
Video Camera or SD-MovieStage Ver.2.5,
not on a personal computer (the Explorer,
etc.).
≥You may not be able to properly play back
on the SD Video Camera after editing the
recorded data or changing the image data
on a personal computer.
≥Moving Picture format (MPEG4) that can
be played back on the SD Video Camera
is ASF. (Depending on the file, it may not
be able to be played back even if it is in
ASF format.)
≥When you operate the SD Video Camera
using its buttons, pull out the USB cable.
(The SD Video Camera cannot be
operated in the [PC accessing] mode.)
≥When you play back MPEG4 moving
picture file in the card on a personal
computer while the SD Video Camera and
the personal computer are connected, the
frame of the picture may be dropped. In
this case, copy the desired file to the
personal computer and play it back.
≥Use only the supplied USB cable.
≥Do not remove the AC adaptor when the
SD Video Camera is connected to the
personal computer.
≥If the SD Video Camera’s personal
computer peripheral mode
([PC accessing] is displayed) is not
canceled when the personal computer is
turned off, remove the USB cable.
≥If the personal computer switches to the
suspend mode when the SD Video
Camera is connected to it, the personal
computer may not recognize the SD Video
Camera when it reverts to normal mode.
In this case, restart the personal
computer.
≥When you restart the personal computer
while it is connected to the SD Video
Camera, the personal computer may be
stopped during the restart. In this case,
turn the personal computer off, disconnect
the USB cable connecting the SD Video
Camera and the personal computer or
turn the SD Video Camera off, and then
restart the personal computer.
AV25text2.fm 55 ページ ２００３年１１月２５日 火曜日 午後２時５３分