Tuning
There are three ways of searching: automatic search, manual search and MFT (manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about the remote control.
Automatic search
Automatic search
CH+
VOL- MENU VOL+
1.Press MENU button, until TUNING appears on the screen.
TUNING
POSITION 1
BAND UHF
SKIP OFF
SEARCH UP
MFTDOWN AUTO MEMORY 
CH-
2.Press CH+/- button to move the indicator(
)to
AUTO MEMORY.
3.Press VOL+, then
AUTO MEMORYmode will work. The TV set will search automatically all available programs, after that, all available programs will be stored in turn and the TV set will return to the first channel.
TUNING |
|
POSITION | 1 |
BAND | UHF |
SKIP | OFF |
SEARCH | UP |
MFT | DOWN |
AUTO MEMORY
ASM | VHFL 0 | ||
|
|
|
|
STOP 
CH+
VOL- MENU VOL+
CH-
If you want to stop the search, just press VOL- button. The order of the automatic search is due to the frequency of the program, generally speaking, it is used only at the first time you search the program, and once the order of the program has been confirmed, you don't have to use this function, otherwise the order of the program will be changed.
After searching
Press CH+/- button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly, so you should adjust it to the proper system (Reference to page 8).