Viewing TV Programs, Viewing TV programs

Viewing TV Programs

Viewing TV programs

Direct-digit Choosing
	button
	Digit Select
	button
PRE	BACK
SYSTEM
	CH+
VOL-	MENU	VOL+
	CH-

How to select the TV program

1.Use the direct-digit choosing button

Press the button from 0-9 to select a one digit channel.

If you want to select a two-digits channel, press the Digit Select button and change it into two-digits mode, then press the number of the channel.

If you want to select a three-digits channel, press the Digit Select button and change it into three-digits mode, then press the number of the channel.

If the channel position number you select is larger than 218, the TV will use the first two number as the channel position.

2.Use CH+/- button

Press CH+ to increase the channel position number. Press CH- to decrease the channel position number.

3.Use PRE button and BACK button

Press PRE button, you can go back to the channels you viewed (as many as four).

Then, press Back button, you can return to the channels you were watching just now (as many as four) .

For example, if you have viewed channel 1,2,3,4,5,6 after the TV is powered on, and the channel you are watching now is number 7, then press PRE button, you can view channel 6,5, 4,3, and you may press the BACK button to return to channel 7.

Choose the proper volume you like

Press VOL+/- button to adjust the volume.
If the VOL STORE is set ON, the volume of
the pre-fifty channel will be stored
independently.	VOLUME
Press VOL+ to increase the volume, press	VOLUME
VOL- to decrease the volume.

If the color or sound of one channel is abnormal

It might be because the color or sound
system has been set improperly.You may
follow the instruction below to adjust it.
Press SYSTEM button, and you can see	COLOR	AUTO
the form.	SOUND	DK
the form.
If the color of the picture is abnormal	SELECT	ADJUST
If the color of the picture is abnormal	to COLOR,
Press CH+/- button, and move the indicator	to COLOR,

and press VOL+ button to select the proper color(AUTO,PAL, NTSC4.43 and NTSC3.58 will appear alternately). Generally, please set to AUTO.

If the sound is abnormal
Press CH+/- button, and move the indicator
to SOUND, and press VOL+/- button	COLOR	AUTO
to select the proper sound if it can be	SOUND	DK
selected.	SELECT ADJUST
	SELECT ADJUST